[ Home ] [ Up ] [ Catalog ] [ Terms And Conditions ] [ Search ] [ View Cart ] [ Checkout ] [ About Us/Retail Store Info ] [ Contact Us ] [ Login ]

Store Sections:

Shop By Brand

Air Compressors

Automotive Tools & Equipment

Cordless Tools

Gas Generators

Grey Pneumatic / Impact Sockets

Hose, Cord, & Cable Reels

Industrial Air Tools

Lifting Equipment

Material Handling

Measurement Equipment

Metalforming

Metalworking

Outdoor Power Tools

Plumbing Tools

Pneumatic Fastening Tools

Porter Cable

Power Tools

Tile, Masonry, Concrete Equipment and Accessories

Tool Storage

Welding and Accessories

Woodworking

Woodworking Hand Tools

Non-Tool Items

Online Payments

Visit Us on eBay

Automotive

Tool Zone Catalog > Automotive Tools & Equipment > Vehicle Repair Tools > Brake Tools

Ammco AMM1450 Deluxe Brake Parts Washer
	PRICE: $829.31
• OSHA preffered method • Low pressure pneumatic pump • Compressed air supply filter and coalescing filter maximize pump life • 3-stage filtration of brake cleaning solution • Reusable oil absorbent boom removes oil and contaminants • Economical water-based biodegradeable cleaning solution • Heavy duty polyethylene 10 gal. tank • Hang-on parts basket • Jumbo 24"x24"x8" deep polyethylene basin with a lid that doubles as a drain pan for use on alignment racks • This unit pays for itself - Typical consumable cost per complete brake job is just $0.14
Quantity:

Astro Pneumatic AP 7848 8 Pc. Brake Tool Set
	PRICE: $48.15
• Set includes: Spring Compressor; Brake Spring Installer; Spring Removal Tool; Brake Retaining Spring Tool; Brake Spring Pliers; Two Brake Adjustment Spoons; Mini Brake Adjustment Spoon • Comes in a blow molded case.
Quantity:

Astro Pneumatic AP 7860 Disc Brake Caliper Wind Back Tool Kit
	PRICE: $62.26
• Rotates piston back into caliper for fitment of new brake shoes • Works on many models from these manufacturers: Mercedes, BMW, VW, GM, Audi, Ford, Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Rover 4wd • Kit consists of 11 seperate pieces
Quantity:

Assenmacher Specialty Tools AST6300 VW/Audi 7 Piece, 12-point Socket Set
	PRICE: $87.33
• 6300 XL-14 - for R and R of late model Eurovan axle shafts and ball joints • 6300 XL-8 - for R and R of axle shaft bolts on VW Beetle, Jetta TDI and older VW/Audi models • 6300 XL-10 - for R and R of axle shaft bolts on VW Passat and Golf (new body style) • 6300 X-16 - for R and R of manual transmisson drain plug and Porsche Cayenne brake caliper bolts • 6300 X-12 - for R and R of axle shaft bolts on newer VW Jetta (gas) and rear toe adjustment on 1999 and later Audi A6 • 6300 X-14 - for R and R of Audi TT differential bracket and for bell housing bolts with tight clearance on various VW models • 3424 - spreader for assisting R and R of strut housing on newer VW and Audi TT
Quantity:

CalVan Tools CAL700 Heavy-Duty Universal Disc Brake Pad Spreader
	PRICE: $26.39
• Handles single & dual piston applications. • Universal design includes working with difficult Ford F-150 & 250, front wheel drive GM. • Allows installer to easily compress both pistons at once. • Can save up to 30 minutes per job. • Only tool on market that spreads single and dual pistons simultaneously. • Patent pending.
Quantity:

K-D Tools KD 2774 Universal Brake Shoe Retaining Spring Tool
	PRICE: $9.99
Double-ended tool removes and installs small and large car drum brake retaining springs. Tool fits sized 5/8 to 11/16" and 11/16 to 7/8" diameter. Special sockets grip retaining washers. Push and turn to remove or install.
Quantity:

K-D Tools KD 280 Bendix Drum Brake Spring Tool
	PRICE: $12.32
Tool removes and installs return spring on Bendix drum brakes. To use, place socket end over spring anchor and twist to remove. Hook notched end through spring and over the post, then lift to install.
Quantity:

K-D Tools KD 285 Brake Shoe Retaining Spring Tool
	PRICE: $11.62
Tool removes and installs retaining springs 11/16 to 7/8" in diameter. Special socket grips retaining washer. Push and turn to remove or install.
Quantity:

K-D Tools KD 287 Drum Brake Adjusting Tool
	PRICE: $6.53
Tool adjusts clearance between drum brake and brake shoe. It fits through a slot in the backing plate and turns the star wheel in many drum brakes.
Quantity:

K-D Tools KD 295 Drum Brake Adjusting Tool
	PRICE: $10.40
Tool adjusts clearance between drum brake and brake shoe. It fits through a slot in the backing plate and turns the star wheel. Ends of tool are offset for hard-to-reach areas on small cars.
Quantity:

K-D Tools KD 298 Brake Spring Pliers
	PRICE: $25.87
Tool easily removes and installs shoe return springs on most drum brakes. Socket end removes spring from anchor stud and notched end installs spring on anchor. Tool is chrome plated to resist rust and provides easy cleanup.
Quantity:

K-D Tools KD 3163 Disc Brake Piston Tool
	PRICE: $15.78
Designed to rotate the parking-brake-activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with 4-wheel disc brakes. Tool will function on most domestic and import vehicles.
Quantity:

K-D Tools KD 41540 Rear Brake Caliper Kit
	PRICE: $59.20
• Set designed for vehicles with brake pistons that are mechanically tied to the parking brake and require a turning action to push back. Set covers most domestic and import vehicles • Kit Contents: 41541 Applicator and Pad, 41542 Adapter 0 (2-1/2" 1 Pin), 41543 Adapter 2 (2", 3 Pin), 41544 Adapter 3 (2-1/4" 3 Step), 41545 Adapter 4 (1-1/4", 2 Pin), 41546 Adapter 5 (1-3/8", 2 Pin 3/8" Drive), 41547 Adapter 6 (1-5/8", 2 Pin (L)), 41548 Adapter 7 (1-5/8", 2 Pin (S)), 41549 Adapter 8 (1- 7/8", 1 Pin), 41550 Adapter P (2-1/4", 1 Pin)
Quantity:

Lisle LIS10000 Brake Cylinder Hone
	PRICE: $18.74
3-Stone Hone fits cylinders 27/32" to 2" (21.4-50.8mm). Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone the end in step-cut and blind-end cylinders. 240 grit stones are 1 1/8" long. Flexible driver.
Quantity:

Lisle LIS12550 Brake Caliper Bit Set
	PRICE: $9.77
• For servicing disc brakes • Three 3/8" square drive sockets with hex bits to remove and replace floating caliper mounting bolts. • 3/8" and 8mm hex bits for GM and 1/4" hex bit for Ford
Quantity:

Lisle LIS24300 Speedy Brake Pad Spreader
	PRICE: $49.70
• Squeeze the handle and the fast acting plunger compresses disc brake pistons in seconds. • Makes brake pad replacement an easy job.
Quantity:

Lisle LIS24400 Disc Brake Pad Spreader
	PRICE: $11.22
For installing pads on most domestic and import cars and light trucks. Tool compresses disc brake piston for easy pad installation.
Quantity:

Lisle LIS25000 Rear Disc Brake Caliper Tool
	PRICE: $81.20
• For Rotating Pistons Back into the Caliper to Provide Clearance for New Pads. Includes 5 adapters (available individually) for use in both 2 and 4-wheel rear disc brake assemblies of most domestic and import cars. Tool may be used "on" or "off" the car. A real time saver that makes this tough job easy. Helps prevent damage to the piston and boot.
Quantity:

Lisle LIS25750 Dual Piston Brake Pad Spreader
	PRICE: $59.07
Directions: • Squeeze the tool handle until the plunger contacts the inboard brake pad. • Continue squeezing to compress both pistons. • Makes dual piston pad replacement a simple job.
Quantity:

Lisle LIS27740 Brake Caliper Torx® Socket Set - 3 Pc.
	PRICE: $12.78
• T40, T45, T50 Torx sockets for fitting most Ford and GM brake calipers • 3/8" drive, one piece design
Quantity:

Lisle LIS28600 Rear Disc Brake Piston Retraction Tool
	PRICE: $14.58
Rotates piston back into the caliper when replacing rear brake pads. This six sided tool now fits more applications. Fits most domestic and some import applications. Push and turn tool to rototate piston into caliper. Use with 3/8" ratchet and extension.
Quantity:

Lisle LIS29150 Universal Brake Caliper Bit Set
	PRICE: $31.25
• Nine Sizes for Brake Caliper Bolt Applications. Set includes four Torx® and five hex bits for removal and installation of brake caliper mounting bolts. Includes the following sizes: T-40, T-45, T-47, T-50, 1/4", 3/8", 7mm, 8mm and 10mm. All bits are 3/8" square drive. Handy sleeve keeps bits together in one place.
Quantity:

Lisle LIS45100 Brake Return Spring Tool
	PRICE: $14.68
Designed for import car drum brake return springs. The tool removes and installs return springs. Also works on domestic brakes that don't use an anchor pin. Engage brake spring tool head. Turn handle to lock on spring. Expand spring to install or remove.
Quantity:

Lisle LIS48400 Import Car Brake Clip Tool
	PRICE: $13.94
Designed for import cars with brake shoe hold-down clips. Removes and install the brake clip and nail on brake shoes in seconds. Set tool head in the brake clip groove. Push tool to depress brake clip. Turn handle 1/4" turn to disengage clip from nail. Reverse to install.
Quantity:

Loctite LOC40299 Disc Brake Quiet Stick
	PRICE: $7.06
• Invented by Henkel, this unique, wax-like stick is specially formulated to dampen brake pad vibrations, and eliminate associated squeaking and noise, without the sticky, smelly mess of traditional, solvent and water-based products. Disc Brake Quiet Stick forms a water-resistant, high temperature film that will absorb vibration and quiet disc braking. • Revolutionary applicator • No solvents • Stops brake squeals, squeaks and chatter
Quantity:

Lock Technology LT 770 Dual Piston Brake Press
	PRICE: $39.03
The LT-770 presses in dual brake pistons as well as single pistons brake calipers. • Universal application for most cars, light and heavy trucks. • Easy single piece operation, eliminates nuts and bolts to assemble and disassemble on brake assemblies.
Quantity:

Lock Technology LT 880 Truck Brake Spring Installer
	PRICE: $13.33
• A must have tool for 3/4 ton and heavier trucks. • The rotating pivot point adjustable head allows the mechanic to clear obstacles around hub assemblies in rear brake systems. • Designed with a T-handle to provide the service technican maximum torque when compressing and twisting stiff springs which hold down pins protruding through rear of brake backing plate.
Quantity:

OTC OTC7034 Disc Brake Pad Spreader
	PRICE: $46.34
No longer must disc brake pad installation be difficult. The No. 7034 fits between the two new pads being installed, then expands to retract the piston. Leaves both hands free to start the caliper over the rotor. After it's started, the spreader is removed and you slide the caliper over the rotor the rest of the way. Cuts installation time dramatically. Works on all standard and four-piston caliper disc brakes.
Quantity:

OTC OTC7317A Disc Park Brake Caliper Tool Kit
	PRICE: $56.42
Includes: No. 7553 - Four wheel disc brake adapter tool Fits 1 1/2in. pistons. Usable two ways: one side fits GM Honda Mitsubishi Mazda Dodge Conquest and Subaru; other side fits Ford Pontiac Fiero Subaru and Toyota. Wt. 3 oz. No. 7554 - Four wheel disc brake adapter tool. Fits 1 11/16in. pistons on Subaru Nissan Datsun and Ford Thunderbird. Wt. 5 oz. No. 7555 - Four wheel disc brake adapter tool. Fits GM 1 7/8in. pistons. Wt. 5 oz. No. 7556 - Four wheel disc brake adapter tool. Fits GM 2 1/8in. pistons. Wt. 7 oz. No. 7557 - Four wheel disc brake adapter tool. Fits GM 2 1/2in. pistons. Wt. 10 oz.
Quantity:

OTC OTC7853 Proportioning Valve Depressor for ABS Brake Systems
	PRICE: $40.85
Proper service procedure requires that a proportioning valve depressor on the 4WAL unit when pressure bleeding the brake system. For best results on 4WAL, use two of these depressors, one for each valve. Services a wide variety of GM utility vehicles, vans, and pickups with Kelsey Hayes anti-lock brake systems. Also works on RWAL systems and must be installed on the proportioning valve (only one depressor required for RWAL). This tool supersedes Kent Moore No. J-35856.
Quantity:

K-D Tools KD 266 Replacement Stones (3)\n
$K-D Tools KD 266 Replacement Stones (3)\n$	PRICE: $5.51
• For 265 and/or 2544 Drum Brake Cylinder Hone • Size: 320 • Stone: 1" • Stones fit brake cylinder hones 265, 2544 and 267
Quantity:

K-D Tools KD 3376 Disc Brake Pad Spreader
	PRICE: $12.51
Pushes the caliper piston back on disc brakes that do not have the parking brake mechanism as part of the disc brake caliper.
Quantity:

K-D Tools KD 3355 GM-For Disc Brake Piston Tool
	PRICE: $18.77
Tool rotates the piston back on GM and Ford vehicles equipped with real wheel disc brakes. Fits GM vehicles with 2-1/8 and 1-7/8" pistons and Ford vehicles 1987 to current with rear disc brakes. Use in conjunction with 3/8" square drive tool. Ford applications: 1987 to current: T-Bird 1988 to current: Continental, Mark VII1990 to current: Probe, Taurus/Sable 1991 to current: Town Car 1992 to current: Crown Victoria, Cougar, and Grand Marquis.
Quantity:

Lisle LIS23530 HARD STONE SET
	PRICE: $9.77

Quantity:

K-D Tools KD 2326 Tire Tread and Brake Lining Gauge
	PRICE: $17.03
Measure the amount of lining remaining on riveting drum shoes and disc brake pads. Gauge measures tire tread depth up to 9/16" in graduations of 1/64".
Quantity:

K-D Tools KD 265 Brake Cylinder Hone
	PRICE: $20.69
Tool hones drum brake wheel cylinders and disc brake calipers from 13/16 to 2-3/4" (21 to 69mm) in diameter. Its sleeve makes insertion in cylinder easy and protects stones when not in use. Use with a variable-speed drill. Use 2004 Stone Set for disc brake honing and 266 for drum brake honing.
Quantity:

K-D Tools KD 3029 Economy Brake and Engine Cylinder Hone Set
	PRICE: $38.86
Multi-purpose set includes 3 complete hones and 1 set of 2" stones. Set includes: Complete hone for brake, master and wheel cylinders ¾ through 2-1/2" capacity, with 1-1/8" medium-grit stones, Complete hone for small car brake wheel hone for disc brake caliper honing. 1-1/4" through 3-1/2" capacity, with 3/4" medium-grit stones; also ideal for lawn and garden small-engine cylinder honing when used with three 2" medium-grit stones (included). Replacement part: 3029-75 three 2" Cylinder Hone Stones.
Quantity:

Lisle LIS10500 Brake Cylinder Hone
	PRICE: $18.15
• 2-Stone hone fits cylinders 11/16" to 2 1/2" (17.4-63.5mm). • Controlled pressure makes it possible to polish or hone with just one stone grit. • Square ends of stones hone to the end in step-cut and blind-end cylinders. • 240 grit stones are 1 1/8" long. • Flexible driver.
Quantity:

Lisle LIS11260 Brake Spring Pliers
	PRICE: $28.89
• Double ended tool for removing and installing brake springs • Use plier tips to stretch brake spring. • Handle ends remove and install spring over anchor post.
Quantity:

Lisle LIS23520 STONE SET
	PRICE: $9.77

Quantity:

Lisle LIS46750 Brake Spring Tool
	PRICE: $12.96
• Makes it Easy to Remove and Replace Springs • A spring tool for removing and replacing brake return springs that are set over a post • Heat-treated end fitting engages hook and removes it from the post when the tool is turned clockwise • Shoe horn design on the other end makes it easy to slip the spring back over the post • Large handle gives good grip and easy operation
Quantity:

Lisle LIS47400 Brake Spring Washer Tool
	PRICE: $9.12
Fits Both Large and Small Washers. Troublesome brake shoe retaining spring washers can now be easily removed and then reinstalled. Wide "window" allows better visibility to align the nail and washer slot.
Quantity:

Lisle LIS50600 GM Single Spring Brake Tool
	PRICE: $39.75
• Releases Tension on Both Large and Small GM Single Spring Brakes During Servicing. Many GM brakes use a heavy single spring. The 50600 engages the spring and quickly releases the spring tension. The brake can then be disassembled to replace brake shoes, emergency brake cable or service the brake cylinder. Supersedes our 49900 which works on the small spring only. • Applications: Smaller Spring 1991 to current GM H Body; Bonneville, LaSabre; Delta 88; 1992 to current GM C & H Body; Buick Electra; Olds 88; Cadillac Fleetwood; Cadillac DeVille; Chevrolet Lumina APV; Pontiac Trans Sport; Olds Silhouette; 1995 to current Chevrolet Lumina & Monte Carlo Larger Spring 2005 to current Chevrolet Silverado; 2004 to current Chevrolet Colorado.
Quantity:

© 2003-2010 Tool Zone, Inc. All Rights Reserved. Tool Zone is a Federally Registered Trade Mark.

Cart Summary
Items:
Value:

[ View Cart ] [ Checkout ]

Join Our Newsletter

Trusted Commerce

Tool Zone Specials

Retail Store Information