[ Home ] [ Up ] [ Catalog ] [ Terms And Conditions ] [ Search ] [ View Cart ] [ Checkout ] [ About Us/Retail Store Info ] [ Contact Us ] [ Login ]

Store Sections:

Shop By Brand

Air Compressors

Automotive Tools & Equipment

Cordless Tools

Gas Generators

Grey Pneumatic / Impact Sockets

Hose, Cord, & Cable Reels

Industrial Air Tools

Lifting Equipment

Material Handling

Measurement Equipment

Metalforming

Metalworking

Outdoor Power Tools

Plumbing Tools

Pneumatic Fastening Tools

Porter Cable

Power Tools

Tile, Masonry, Concrete Equipment and Accessories

Tool Storage

Welding and Accessories

Woodworking

Woodworking Hand Tools

Non-Tool Items

Online Payments

Visit Us on eBay

Automotive

Tool Zone Catalog > Automotive Tools & Equipment > Vehicle Repair Tools > Engine, Trans., and Driveline Tools

Astro Pneumatic AP 7801 7pc. Sensor & Sending Unit Socket Set
	PRICE: $64.44
Set Includes: • 1" & 1-1/16" Oil Pressure Sending Unit Socket Includes a 1" and 1-1/16" hex which allows the removal of oil pressure sending units. Special deep design fits switches up to 2-5/8". Designed to be used with a 3/8" drive tool or 1-1/8" wrench. • 1-3/16" Oil Pressure Sending Unit Socket Allows the removal of oil pressure sending units on late 1980 and mid 1990 GM vehicles. Designed to be used with 1/2" drive tool. • 1-1/16" GM Thermal Sensor Switch Socket Allows the removal and installation of thermal sensor switch on 1973 - 1977 GM vehicles. Designed to be used with 1/2" drive tool. • 7/8" Heated Oxygen Sensor Socket Socket designed with slot in socket which accommodates the connectors on heat oxygen sensors. Socket has a double 1/2" drive for easy access. • 7/8" Low Profile Offset Oxygen Sensor Socket Low profile design for use in tight spaces. Designed to be used with 3/8" drive tool. • 7/8" Oxygen Sensor Socket Socket designed to remove and install oxygen sensors in most domestic and many imported vehicles. Socket designed with slot which allows clearance of wire. Designed to be used with a 3/8" drive tool or 1" wrench. • 7/8" Universal Vacuum PVS, TVS Valve and Oxygen Sensor Socket Designed to remove and install vacuum switches with a 7/8" hex and some oxygen sensors. Designed to be used with 3/8" drive tool or with a 1" wrench.
Quantity:

CalVan Tools CAL38900 Ford Spark Plug Insert Installer
	PRICE: $299.41
• The Ford SPark Plug Insert Installer is designed to aide in repairing Ford Modular Cylinder Heads. • Quality, foolproof repair system that is fast, cost effective and simple to use. • Used to repair damaged heads from blown spark plugs, with an alloy steel insert ... takes as little as 15 minutes, no more than 45. • Includes six inserts.
Quantity:

HeliCoil HEL5396-14 Sav-A-Thread HT® - Ford 5.4 and 4.6 Liter Spark Plug Thread Repair
	PRICE: $262.98
• M14 x 1.25 spark plug thread repair. • Designed for "Half Thread" (HT) spark plug applications in 4.6 and 5.4 liter engines. • Allows access to deep ports. • Positive mechanical locking feature ensures insert stability; insert will not come out. • Utilizing the piloted reamer tap, alignment is maintained and pre-drilling is not required. Note: It is recommended that the head be removed before installation to ensure chips do not enter the cylinder. Kit contents: Piloted reamer tap (1) Steel installation tool (1) Expanding tool (1) M14x1.25 HT inserts (12)
Quantity:

K-D Tools KD 2078 Universal Overhead Valve Spring Compressor
	PRICE: $35.55
Remove valve springs on most cars with overhead valves without removing the cylinder head. Offset jaws grip the valve spring in parallel compression. Tool maintains constant length as spring is compressed. Use with 901 or 2992 Air Hold Fittings to keep valve in place.
Quantity:

K-D Tools KD 2284 Heavy-Duty Piston Ring Compressor
	PRICE: $15.48
Use compressor to install pistons 2-1/8 to 5" (54 to 127mm) in diameter. Positive lock action provides positive compression and fingertip release. To compress piston ring into grooves, slip the tool over the piston and tighten with L-shaped wrench. Insert piston into cylinder and tap with a hammer to install. Enlarged crimped edge prevents compressor from entering the cylinder.
Quantity:

K-D Tools KD 2833 Engine Cylinder Hone
	PRICE: $33.68
Hone and remove glaze from engine cylinders from 2" to 7" (51 to 177mm) in diameter. Adjust spring tension for positive cutting action and set diameter with spread limiter. Hone includes medium grit stones No. 240.
Quantity:

K-D Tools KD 3271 Deluxe Universal Overhead Valve Spring Compressor
	PRICE: $60.40
Compressor easily removes valve springs on most cars and light trucks. Tool can be used with the cylinder head on or off the engine. Features a removable handle allowing use with 5/8" socket or wrench in confined areas and an extra-long leg for more applications. For best results, use with 901 or 2992 Air Hold Fittings to pressurize the cylinder and keep the valves in place during removal of the spring and keepers. Includes: Long Leg, length 3 15/32", Short Leg, length 3 5/32"
Quantity:

K-D Tools KD 41600 Master Bolt Grip Kit - Multi-Use Puller Kit
	PRICE: $68.84
• Master Bolt Grip Kit works on harmonic balancers, steering wheels, crankshaft pulleys, and gears. Capable of handling almost every two or three-way bolt pull possible on most cars, pickups, SUVs, and small engines. Kit Contents: • Two or three way yoke • 4 pc. tip set • Metric bolt set • SAE bolt set • Center screw for puller (2)
Quantity:

K-D Tools KD 41770 3 Piece, Oil Pump Primer Kit
	PRICE: $56.36
• Oil Pump Primers protect freshly rebuilt or modified engines from premature wear caused by a dry start. • Kit contents: GM Oil Pump Primer, Ford Oil Pump Primer 5/16" Hex Drive and Ford Oil Pump Primer 1/4" Hex Drive
Quantity:

K-D Tools KD 492 Oil-Seal Remover and Installer
	PRICE: $36.39
Tool removes and installs upper rear main oil seals with engine and crank-shaft in place. It works on both wick- and neoprene-type seals. Chinese Finger-type grip won't slip from the seal during installation. Set includes a wick seal remover, installer, guide funnels, pusher, offset trimmer and neoprene seal punches.
Quantity:

K-D Tools KD 505 Valve Lapping Tool
	PRICE: $6.65
Hand lap small and large flat-head unslotted valves. Textured handle and thin wall suction cups make lapping easy. To use, place grinding compound on valve face and put in seat. Put suction cup on valve head and turn handle between hands to grind. • For most valves - 2 suction cups; 1-1/8" and 1-3/8" dia.
Quantity:

K-D Tools KD 850 Piston Ring Compressor Set
	PRICE: $68.61
Install pistons from 2-7/8 to 4-3/8" (73 to 111mm). Pliers can be used parallel or perpendicular to the cylinder block. Fine-tooth ratcheting lock allows you to compress bands in small increments. Set works by placing a band around the piston, covering the rings and hooking pliers into the band and squeezing. With the band tightly around the piston, insert piston into cylinder and tap lightly with hammer handle to install. Set includes pliers and 6 bands, 1119 through 1124.
Quantity:

K-D Tools KD 912 Valve Spring Compressor
	PRICE: $18.22
Remove and replace valve springs in GM 8-cylinder engines. Heavy-duty tool replaces weak or broken valve springs and guide seals with cylinder head on the engine. Compressor is used by removing rocker and fastening tool to stud with nut. Pull on the handle to compress spring. Use with 901 or 2992 Air Hold Fittings to keep valve closed. Length: 12-1/2".
Quantity:

Lisle LIS11750 Clutch Coupling Remover for Ford
	PRICE: $7.10
Disconnects Ford Hydraulic Clutch Lines. • Easily disengages the hydraulic clutch line from the clutch slave cylinder on some Ford manual transmissions. • Tool prongs fit around clutch line above nylon sleeve. • For 1989 and newer Mercury Cougars and Thunderbirds. • 1988 & newer small trucks including Explorer, Ranger and Bronco II.
Quantity:

Lisle LIS13000 Exhaust Manifold Spreader
	PRICE: $14.51
For Reinstalling the Manifold on Small Block Chevrolets. • A simple way to expand a warped manifold so all bolt holes are accurately aligned. • Helps prevent cross-threading of manifold bolts. Works best when used in pairs. • Or install before removing manifold to prevent misalignment.
Quantity:

Lisle LIS13250 Oil Pressure Switch Socket - Deep
	PRICE: $9.94
Fits 1-1/16" switches up to 2-5/8" long. Applications include: '91 and newer GM vehicles and '87 and newer Chrysler Vehicles with combination light and gauge oil pressure switches. Use with 3/8" drive or 1-1/8" external hex.
Quantity:

Lisle LIS18000 Universal Camshaft Bearing Tool
	PRICE: $180.87
• Drives Camshaft Bearings Smoothly. • Easy on Bearings. Now, one complete low cost set that will remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks. Range of 1.125" to 2.69" (28.58 - 68.3mm). The expander has a neoprene sleeve over which the split driving plugs are mounted and expanded to size. This tool has two sets of rubber sleeves supplied with it for each expanding driver. The brown sleeves are used when driving thin wall bearings (.065). The black sleeves should be used when driving thick wall bearings (.090). Instruction sheet T18000 provides complete, illustrated operating instructions and parts list. Includes: Driving shaft, driving shaft extension, expander unit, five split driving plugs, two driving collars, centering cone and blow molded case. Shipping wt. 17lb.
Quantity:

Lisle LIS19500 2 1/8" - 5" Ring Compressor
	PRICE: $20.88
Spring clutch eliminates ratchet problems. Spring clutch assures a proper fit on the piston and a positive locking action. Range 2 1/8" to 5".
Quantity:

Lisle LIS23500 Stone-Type Glaze Breaker
	PRICE: $34.70
• Full 2" to 7" Range (50.8 - 177.8mm) • Controlled pressure assures positive, adjustable contact through full range • Operates with any electric drill. • Furnished with 3" long 220 grit stones • Adjustable stop collar permits quick selection of two range settings, from 2" to 4" and from 4" to 7" • Stone arms are easily compressed to eliminate cylinder scratches.
Quantity:

Lisle LIS36200 Valve Keeper Remover & Installer
	PRICE: $49.72
• Quickly Removes Valve Keepers On Overhead Valve Engines. Makes Valve Component Disassembly And Reassembly Fast And Easy. • Push or tap tool with a hammer to remove valve keepers. A magnet in the tool body captures the keepers for quick removal and valve disassembly. To install keepers, load keepers into the installer. Push or tap to install. Can be used on the car or a work bench.
Quantity:

Lisle LIS36880 Dual Overhead Cam (DOHC) Lock Tool
	PRICE: $41.02
• Locks camshaft sprockets in place during belt/chain replacement. • This versatile tool easily locks and holds both camshaft sprockets firmly in place. The two parallel bars "float" which allows the knurled pins to align with the sprockets. Preserves the engine timing during belt and chain replacement.
Quantity:

Lisle LIS38220 Universal Cam Adjuster
	PRICE: $46.48
• Adjusts to Fit Different Sized Cam Sprockets. • This adjustable tool is designed to both hold and turn cam sprockets. The tool is needed to turn the cam sprockets to adjust the cam position. It can also be used to hold the cam sprocket in place when removing the cam bolt. It will work on all single and dual overhead cam sprockets with holes.
Quantity:

Lisle LIS48500 Push Rod Remover
	PRICE: $20.76
• Works on GM V6 2.8L, 3.1L and 3.4L Engines. • Quickly removes push rods so you can replace the intake gasket. • No need to loosen and retighten the rocker arm. • The tool pivots the rocker arm to compress the valve spring and free the push rod for removal.
Quantity:

Lock Technology LT 865 Spark Plug Piston Lock
	PRICE: $15.48
• A must have tool when servicing timing belts and chains. • This unique tool prevents the crankshaft from shifting when servicing belts and chains. • Designed with a brass end to prevent damage to the piston. • Replace one spark plug with spark plug piston lock to lock up motor.
Quantity:

OTC OTC4528 Stinger Clutch Alignment Tool Kit - 17 Pc.
	PRICE: $58.60
• Essential for clutch installation on virtually all cars and light-duty trucks. Aligns clutch plate properly by using tapered cones and pilot adapters. • Includes seven fractional pilot adapters, one clutch disc centering adapter and one alignment shaft. I• ncludes five metric pilot adapters, two clutch disc centering adapters and one alignment shaft. • Housed in a blow-molded storage case.
Quantity:

OTC OTC4603 Stinger Freeze Plug Remover/Installer Set
	PRICE: $72.67
• Designed to remove and install frost plugs used in liquid-cooled gas and diesel engines found in automobiles, trucks, SUVs, agricultural equipment, and construction equipment. • Simply use a hammer with the driver and appropriate disc to install frost plugs ranging from 1" to 2-3/8" in diameter. • Set contains: No. 4603-1 Installer Handle (18" lg.); No. 4604-2 Frost Plug Remover; No. 4604-3 Frost Plug Disc Set (7 ea., plus 1 retaining nut).
Quantity:

OTC OTC6467 Ford Cam Alignment Tool
	PRICE: $29.01
• Applications include: 19941995 Mustang (3.8L V6), 1989-1995 Thunderbird Supercharged, 1990-1995 Thunderbird (3.8L V6), 1989-1995 Cougar Supercharged (3.8L V6), 1990-1995 Cougar (3.8L V6), and 1995 Windstar (3.8L V6). • Ford Tool Part No.: T89P-12200-A • Global Part No.: 303-358
Quantity:

OTC OTC6469 Ford Cam Sensor Synch Tool
	PRICE: $46.01
• Applications include: 1997-2002 Econoline (4.2L V6), 1997-2002 F-Series Truck (4.2L V6), 1996-1998 Explorer (5.0L V8), 1996-1998 Mountaineer (5.0L V8), 1996-1998 Mustang (3.8L V6), 1997 Thunderbird (3.8L V6), 1997 Cougar (3.8L V6), and 1996-1998 Windstar (3.8L V6). • Ford Tool Part No.: T96T-12200-A • Global Part No.: 303-562
Quantity:

OTC OTC6472 Ford Cam Sensor Synch Tool
	PRICE: $36.32
• Applications include: 1995-1997 Aerostar (3.0L V6), 1996-1998 Aerostar (4.0L V6), 1996-1998 Explorer (4.0L V6), 1995-1997 Ranger (3.0L V6), 1996-1998 Ranger (4.0L V6), 1996-1997 Taurus (3.0L V6 2-Valve), 1996-1997 Sable (3.0L V6 2-Valve), and 1995-1997 Windstar (3.0L V6). • Ford Tool Part No.: T95T-12200-A • Global Part No.: 303-529
Quantity:

OTC OTC6474 Ford Cam Sensor Synch Tool
	PRICE: $20.88
• Applications include: 1994-2002 Contour (2.0L DOHC Zetec), and1994-2002 Mystique (2.0L DOHC Zetec). • Ford Tool Part No.: T94P-6256-CH • Global Part No.: 303-465
Quantity:

OTC OTC6498 Ford 4.6L 4-Valve Cam Timing Kit
	PRICE: $163.82
• Works on: - 1993-04 Ford, Lincoln, and Mercury - 1993-98 Lincoln Mark Series - 1995-02 Lincoln Continental - 1996-04 Ford Mustang - 2003-04 Mercury Marauder - 2003-04 Lincoln Aviator vehicles with 4.6L 4-valve V-8 engine. • Kit includes: Camshaft positioning tool, camshaft holding tool, crankshaft positioning tool, secondary chain tensioner tool. • Saves time; all tools required for camshaft timing are in one kit.
Quantity:

OTC OTC6689 Chrysler/Jeep Master Cam Tool Set
	PRICE: $379.80
The Chrysler/Jeep Cam Timing Tools are provided to ensure proper cam timing when servicing timing belts, chains, head gaskets, or performing other valve train repairs. These 15 tools are based on OE designs and are offered to service the following applications: 1993 - current 3.5 V-6 engine. 1994 - current 2.0 & 2.4 I-4 and 2.5 V-6 engines. 1998 - current 2.7 V-6 engine. 1989 - 1995 2.0 I-4 Mitsubishi engine. 1991 - 1997 3.0 V-6 Mitsubishi engine. 1981 - 1993 2.2 & 2.5 I-4 engines. 1999 - current 4.7 V-8 engine. 2002 - current 3.7 V-6 engine. Cam positioning is an IMPORTANT procedure. If cam timing is not correct, the engine may still run but emissions and mileage will be affected. The engine computer may also initiate the "Check Engine" light
Quantity:

OTC OTC7028 Clutch Adjusting Wrench for Spicer Clutches
	PRICE: $52.69
• For Spicer®-built Heavy-Duty Clutches • This easy-to-use clutch adjusting wrench will solve the difficult, time-consuming job of internal adjustment of Spicer angle-spring and multiple lever clutches found on nearly 50% of all heavy-duty trucks. Until now, a pry bar or other makeshift method was used and often resulted in damage to parts, poor job performance and excessive downtime. Wt. 1 lb. 8 oz.
Quantity:

OTC OTC7928 Ford Valve Spring Compressor Tool
	PRICE: $128.94
Compresses valve springs for quicker, easier camshaft, valve seal, valve spring or retainer service-because you don't have to remove the head from the engine first! It's an OEM-approved tool that you use with a 3/8" ratchet or breaker bar. Works on: 1991 and newer Ford 4.6L, two valve, V-8 engines; and 1997 and newer Explorers with 4.0L engines.
Quantity:

Schley Products SP 92350 Narrow Access Valve Stem Seal Removal Pliers
	PRICE: $56.71
• Removes valve stem seals used on most overhead camshaft engines including 4 valve per cylinder engines with very narrow access to the valve stem seal. • "Gripping" serrations in the tip allowing pliers to grasp both original equipment and aftermarket seals regardless of their configuration. • Pliers are made from quality heat-treated steel and come with easy grip handles.
Quantity:

Schley Products SP 96800 Universal Camshaft Pulley Holder
	PRICE: $55.11
• This wrench is designed with grooved pins to hold the camshaft pulley stationary while loosening and tightening the center shaft bolt. • For use with many OHC cam engines. Very useful on many asian import engines, especially transverse mounted V6 motors such as the Nissan VG30 in Maximas, as well as the Toyota 3VZFE and IMZFE used in Camrys. The rear pulleys on these models are in very close proximity to the shock tower making removal and replacement difficult without this locking device.
Quantity:

Sunex International SUN212ZUMDL Ford Drive Line Impact Socket
	PRICE: $34.87
• Specifically designed for drive line applications on Ford Mustang, Crown Victoria, Taurus, Explorer, Expedition, Excursion, Ranger, F150, and Mercury equivalents from 1980’s to present. • 1/2" drive
Quantity:

Thexton THE419X GM Engine Moving Tool
	PRICE: $61.07
• Fits GM front wheel drive vehicles with engine torque struts used on most transverse mounted engines. • Replaces existing torque strut (dogbone) and allows engine to be tilted forward to access spark plugs, distributor, ignition coils, rack and pinion steering gear, power steering hoses, etc. • Easy to install. • Safely holds engine in place. • Extra bolt holes provide fit on all vehicles. • Includes No. 419A adapter.
Quantity:

UView UV 560000 Combustion Leak Detector
	PRICE: $61.82
Fast and accurate method to test for combustion gas leaks in: head gaskets, cylinder heads, and engine blocks. • Positive proof that a leak is present when tester fluid changes color. • Works on gasoline and diesel engines.
Quantity:

K-D Tools KD 501 VALVE GRINDER (5/8", 13/16"
	PRICE: $7.55
DIAMETER)
Quantity:

K-D Tools KD 2835 4" REPLACEMENT STONES (MEDIUM
	PRICE: $16.98
GRIT)
Quantity:

K-D Tools KD 2836 4" REPLACEMENT STONES (FINE
	PRICE: $18.07
GRIT)
Quantity:

K-D Tools KD 2420 Clutch Aligning Set\n
$K-D Tools KD 2420 Clutch Aligning Set\n$	PRICE: $35.50
Align single disc clutches on American and imported cars, light trucks and tractors. Adapter fits through clutch plate and into pilot bushing or bearing. Tapered cone fits into clutch hole and aligns clutch plateproperly. Set includes shaft and 8 two-stepped pilot bearing adapters covering 16 sizes. The plate aligning cone has 1-1/8" maximum diameter taper.
Quantity:

K-D Tools KD 2569 Oil Pressure and Stoplight Switch Socket
	PRICE: $8.47
Removes oil pressure-sending unit on most engines. Socket has a 1" and 1-1/16" hex opening plus recess to accommodate switch. Socket also fits some brake-light switches. Turn with a 15/16" wrench, or a 3/8" square drive tool. Length: 3"
Quantity:

K-D Tools KD 2834 4" REPLACEMENT STONES (COARSE
	PRICE: $17.15
GRIT)
Quantity:

K-D Tools KD 3458 Oil Pressure Sending Unit Socket
	PRICE: $12.32
Use to remove and install oil pressure switches that require a socket with a 1-1/16" hex and that are 2-3/4" deep. Tool can be used with a 3/8" square drive tool or 15/16" wrench. Overall length is 3-1/4".
Quantity:

K-D Tools KD 901 Air Hold Fitting Set for Valve Spring Replacement
	PRICE: $8.42
Use to apply air pressure to keep valve closed while replacing valve spring. Set includes 14 to 18mm adapters threaded for ¼" NPT. To use, remove spark plug and screw air hold into port. Fasten air hose to fitting and apply pressure. Use with 912, 2078, 3087, 3271 valve spring compressors.
Quantity:

Lisle LIS20500 Ring Compressor - 3 1/2" to 7"
	PRICE: $24.23
• Spring clutch eliminates ratchet problems • Spring clutch assures a proper fit on the piston and a positive locking action • 3 1/2" to 7"
Quantity:

Lisle LIS21100 Large Valve Lapper
	PRICE: $10.19
• For hand lapping valves • Thick handles for easy lapping • Has 5/8" and 13/16" diameter cups for smaller valves
Quantity:

Lisle LIS21700 Wrinkle Band Ring Compressor
	PRICE: $21.66
4 Ways Better! - 1. LOW FRICTION! Wrinkle Band cuts friction in half. Rings slide in easily. - 2. WRINKLE BAND! Can't slip down into cylinder. - 3. CAM OPERATED! Set adjustment screw just once for entire set of pistons. - 4. FASTER! Insert a full set of pistons in half the time, with half the work!
Quantity: