Norco 81004C 3 Ton Capacity Jack Stands
	PRICE: $49.00
For automotive use where vehicle is to be supported before making repairs. ALL STANDS ARE SOLD AND INTENDED TO BE USED IN PAIRS. Features: • U.S. Patent No. 5180131 spring loaded pawl provides constant locking pressure against lifting column. • Four legged base with foot pads for added strength and a more secure footing on asphalt. • Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted and handled by the column. • Recessed column saddle for acceptance of vehicle panel rail. • Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle.
Quantity:

Norco 81006D 6 Ton Capacity Jack Stands
	PRICE: $69.00
For automotive use where vehicle is to be supported before making repairs. ALL STANDS ARE SOLD AND INTENDED TO BE USED IN PAIRS. Features: • U.S. Patent No. 5180131 spring loaded pawl provides constant locking pressure against lifting column. • Four legged base with foot pads for added strength and a more secure footing on asphalt. • Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted and handled by the column. • Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle.
Quantity:

Norco 81012 12 Ton Capacity Jack Stands

PRICE:
$179.00

Fleet garages, agricultural and construction maintenance shops.
Features:
ALL STANDS ARE SOLD AND INTENDED TO BE USED IN PAIRS.
• U.S. Patent No. 5180131 spring loaded pawl provides constant locking pressure against lifting column.
• Four legged base with foot pads for added strength and a more secure footing on asphalt.
• Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted and handled by the column.
• Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle.

Quantity:

Norco 81022A 20 Ton Capacity Trailer Stabilizing Stand
	PRICE: $229.00
To stabilize and assist in supporting the front or rear end of a loaded or unloaded tractorless trailer. Sold individually but generally used in pairs. Features: • Meets OSHA requirements for supporting trailers when loaded or unloaded. • 14" diameter base provides maximum leveling stability. • Quick adjust spin handle for ease of turning. • Large diamond plate saddle to grip the load. • 1-1/2" diameter, grade 5, heavy duty screw and nut provide maximum strength and fine adjustment.
Quantity:

Norco 81022AI 20 Ton Capacity Trailer Stabilizing Stand (Import)
	PRICE: $169.00
To stabilize and assist in supporting the front or rear end of a loaded or unloaded tractorless trailer. Sold individually but generally used in pairs. Features: • Meets OSHA requirements for supporting trailers when loaded or unloaded. • 14" diameter base provides maximum leveling stability. • Quick adjust spin handle for ease of turning. • Large diamond plate saddle to grip the load. • 1-1/2" diameter, grade 5, heavy duty screw and nut provide maximum strength and fine adjustment.
Quantity:

Norco 81033A 3/4 Ton Capacity Under Hoist Stand
	PRICE: $99.00
Designed to support vehicle components, not the vehicle. Ideal for exhaust system installation, shock absorber replacement and any task which requires relieving pressure off components. Features: • Lightweight, slender design makes handling easy, even in close quarters. • Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load. • Pedal may be locked in vertical position for storage or shipment. • 1-1/4" diameter acme threaded screw has 26-1/4" of travel.
Quantity:

Norco 81034A 3/4 Ton Capacity Under Hoist Stand w/Foot Pedal
	PRICE: $109.00
Designed to support vehicle components, not the vehicle. Ideal for exhaust system installation, shock absorber replacement and any task which requires relieving pressure off components. Features: • Lightweight, slender design makes handling easy, even in close quarters. • Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load. • Pedal may be locked in vertical position for storage or shipment. • 1-1/4" diameter acme threaded screw has 26-1/4" of travel.
Quantity:

Norco 81035A 1-1/2 Ton Capacity Under Hoist Stand
	PRICE: $119.00
To assist in stabilizing and supporting a vehicle that is raised by an in-ground or above-ground lift. Should be used in pairs. Features: • An adjustment pin chained to the stand secures the support column at 6 different height positions. • Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load. • 1-1/4" diameter acme threaded screw has 6-1/2" of travel for fine adjustment. • 5/8" thick rubber saddle pad.
Quantity:

Norco 81036A 1 Ton Capacity Under Hoist Stand
	PRICE: $499.00
For replacing exhaust systems, shock absorbers and MacPherson struts. Hydraulic power will assist in freeing frozen spring shackles, aligning wheels and steering gear adjustments. Features: • Foot activated pump and lowering pedals allow use of both hands to position components. • Spring return lowering pedal automatically closes the release valve when foot is removed from pedal. • 16" hydraulic travel. • Telescopic support tube with nine height adjustments at 2-1/2" increments. • A 12" diameter, 3/8" thick steel base provides added stability. • Two 3" diameter wheels provide easy maneuvering of stand into work position or around the shop.
Quantity:

Norco 81205 5 Ton Capacity Jack Stands
	PRICE: $219.00
Low profile design in order to support forklifts and heavy machinery. ALL STANDS ARE SOLD AND INTENDED TO BE USED IN PAIRS. Features: • Pin type support column adjusts to four different height positions. • Heavy duty adjustment pin is secured to stand to prevent loss. • Handle provides ease of positioning and carrying. • 9" square base secures and stabilizes load.
Quantity:

Norco 81205I 5 Ton Capacity Jack Stands (Import)
	PRICE: $119.00
Low profile design in order to support forklifts and heavy machinery. ALL STANDS ARE SOLD AND INTENDED TO BE USED IN PAIRS. Features: • Pin type support column adjusts to four different height positions. • Heavy duty adjustment pin is secured to stand to prevent loss. • Handle provides ease of positioning and carrying. • 9" square base secures and stabilizes load.
Quantity:

Norco 81208 10 Ton Capacity Jack Stands (Low Height)
	PRICE: $399.00
Fleet garages, agricultural and construction maintenance shops where a pin type height adjustment column is desired. ALL STANDS ARE SOLD AND INTENDED TO BE USED IN PAIRS. Features: • Pin type support column adjusts to multiple height positions (see dimensions). • Adjustment pin is secured to stand to prevent loss. • Four legged base made of heavy schedule 2" diameter pipe for added stability. • Large support saddle with locating lugs position and center load.
Quantity:

Norco 81208I 10 Ton Capacity Jack Stands (Low Height) (Import)
	PRICE: $199.00
Fleet garages, agricultural and construction maintenance shops where a pin type height adjustment column is desired. ALL STANDS ARE SOLD AND INTENDED TO BE USED IN PAIRS. Features: • Pin type support column adjusts to multiple height positions (see dimensions). • Adjustment pin is secured to stand to prevent loss. • Four legged base made of heavy schedule 2" diameter pipe for added stability. • Large support saddle with locating lugs position and center load.
Quantity:

Norco 81209 10 Ton Capacity Jack Stands (Medium Height)

PRICE:
$399.00

Fleet garages, agricultural and construction maintenance shops where a pin type height adjustment column is desired.
ALL STANDS ARE SOLD AND INTENDED TO BE USED IN PAIRS.
Features:
• Pin type support column adjusts to multiple height positions (see dimensions).
• Adjustment pin is secured to stand to prevent loss.
• Four legged base made of heavy schedule 2" diameter pipe for added stability.
• Large support saddle with locating lugs position and center load.

Quantity:

Norco 81209I 10 Ton Capacity Jack Stands (Medium Height) (Import)

PRICE:
$229.00

Quantity:

Norco 81210 10 Ton Capacity Jack Stands (High Height)

PRICE:
$429.00

Quantity:

Norco 81210I 10 Ton Capacity Jack Stands (High Height) (Import)

PRICE:
$279.00

Quantity:

Norco 81222 22 Ton Capacity Jack Stands
	PRICE: $349.00
Fleet and maintenance garages where low profile stands are used to support loaded trailers. ALL STANDS ARE SOLD AND INTENDED TO BE USED IN PAIRS. Features: • Pin type support column adjusts to four different height positions. • Adjustment pin is secured to stand to prevent loss. • Handle provides ease of positioning and carrying. • 3/8" thick solid steel base plate for added stability. Specifications: Capacity (Each Stand): 22 Ton Low Height: 12" High Height: 20" Height Intervals: 3 x 3" Base Size: 10" x 10" Saddle Size: 2-1/4" x 3-1/4" Shipping Weight: 66 Pounds (Per Pair)
Quantity:

Norco 81222I 22 Ton Capacity Jack Stands (Import)
	PRICE: $219.00
Fleet and maintenance garages where low profile stands are used to support loaded trailers. ALL STANDS ARE SOLD AND INTENDED TO BE USED IN PAIRS. Features: • Pin type support column adjusts to four different height positions. • Adjustment pin is secured to stand to prevent loss. • Handle provides ease of positioning and carrying. • 3/8" thick solid steel base plate for added stability. Specifications: Capacity (Each Stand): 22 Ton Low Height: 12" High Height: 20" Height Intervals: 3 x 3" Base Size: 10" x 10" Saddle Size: 2-1/4" x 3-1/4" Shipping Weight: 66 Pounds (Per Pair)
Quantity:

Cart Summary
Items:
Value:

[ View Cart ] [ Checkout ]

Join Our Newsletter