[ Home ] [ Up ] [ Catalog ] [ Terms And Conditions ] [ Search ] [ View Cart ] [ Checkout ] [ About Us/Retail Store Info ] [ Contact Us ] [ Login ]

Store Sections:

Shop By Brand

Air Compressors

Automotive Tools & Equipment

Cordless Tools

Gas Generators

Grey Pneumatic / Impact Sockets

Hose, Cord, & Cable Reels

Industrial Air Tools

Lifting Equipment

Material Handling

Measurement Equipment

Metalforming

Metalworking

Outdoor Power Tools

Plumbing Tools

Pneumatic Fastening Tools

Porter Cable

Power Tools

Tile, Masonry, Concrete Equipment and Accessories

Tool Storage

Welding and Accessories

Woodworking

Woodworking Hand Tools

Non-Tool Items

Online Payments

Visit Us on eBay

Automotive

Tool Zone Catalog > Automotive Tools & Equipment > Scan, Metering, & Measuring Equipment > Multimeters, Amp Clamps, Test Leads

Electronic Specialties ESI136 136 MAG LEAD Test Lead System
	PRICE: $22.98
• Mag Lead features a magnetic disconnect near the test probe end. • Just disconnect the test probe and you can "stick" to any metallic ground or test point. • Quit fumbling with alligator clips that fall off - Mag Lead’s powerful magnet will hold tight! • This is a time saving tool - if you don’t have to walk to your tool box to retrieve your alligator clips, even on just half the occasions, then you’ve saved time. • Very helpful for automotive reference points and troubleshooting. • Can eliminate the need to hold probes while checking or monitoring a signal. • Two high power, low resistance magnets hold the probe to the lead. • Fits almost all Digital Multimeters and can be used with hand-held scopes too. • Get the Mag Lead, it stays put and won’t fall off, like alligator clips do!
Quantity:

Electronic Specialties ESI301M Fuse Buddy DMM Adapter - Mini Fuse
	PRICE: $18.22
• Blowing Fuses? Plug in the FUSE BUDDY and read circuit amperage draw on your DMM. • Adapts your DMM to plug directly into mini fuse socket. • Original fuse is replaced in-line during testing, thereby maintaining circuit protection. • Makes circuit testing easier, FUSE BUDDY adapter end is shaped like a fuse. • Ideal for electrical troubleshooting at the fuse box.
Quantity:

Electronic Specialties ESI302M Fuse Buddy Tester - Mini Fuse
	PRICE: $29.71
• Blowing Fuses? Plug in the FUSE BUDDY Tester and read circuit amperage draw and voltage. • Original fuse is replaced in-line during testing, thereby maintaining circuit protection. • Makes circuit testing easier, FUSE BUDDY adapter end is shaped like a fuse. • Ideal for electrical troubleshooting at the fuse box. • Can be used to measure all circuit draws up to 20 Amps. • Can even be used to test parasitic drains (battery drains). • Measuring range is determined by your DMM - most DMM’s have a 10 Amp or 20 Amp test range. • Measuring Capability: 0 - 20 Amps / 48V DC or AC.
Quantity:

Electronic Specialties ESI303B Fuse Buddy Adapter - ATC Fuse
	PRICE: $18.22
• Blowing Fuses? Plug in the FUSE BUDDY and read circuit amperage draw on your DMM. • Adapts your DMM to plug directly into mini fuse socket. • Original fuse is replaced in-line during testing, thereby maintaining circuit protection. • Makes circuit testing easier, FUSE BUDDY adapter end is shaped like a fuse. • Ideal for electrical troubleshooting at the fuse box.
Quantity:

Electronic Specialties ESI380 Digital Multimeter
	PRICE: $38.49
This digital multimeter has the compact design and the functions you need for overall convenience. Its capabilites are equal to many higher priced multimeters. Comes with test leads, protective holster, instructions and 9 volt battery. • 20 Test ranges, 7 functions • Fully fuse protected • 10 Meg/Ohm impedance • 10 Amp range • Continuity beeper
Quantity:

Electronic Specialties ESI480A Auto Ranging Digital Multimeter
	PRICE: $63.18
• 41 test ranges, auto-ranging • Auto power off • Dual fuse protection • Capitance and diode testing • Frequency and duty cycle testing • Data hold and relative change functions • Removeable safety leads and jacks • Powered by two AAA bateries (included) • Beeper for continuity testing Specifications: DC Volts: 0-400mV, 4V, 40V, 400V, 600V AC Volts: 0-400mV, 4V, 40V, 400V, 600V DC Current: 0-400µA, 4mA, 40mA, 400mA, 10A AC Current: 0-400µA, 4mA, 40mA, 400mA, 10A Resistance: 0-400, 4K, 40K, 400K, 4M, 40M Ohms Capitance: 0-4nF, 40nF, 400nF, 4µF, 400µF Frequency: 0-9.999Hz, 99.90Hz, 999.9Hz, 9.999kHz, 99.99kHz, 999.9kHz, 9.999MHz Duty Cycle: 0.1% to 99.9%
Quantity:

Electronic Specialties ESI501 Mini Digital Multimeter
	PRICE: $24.63
This is an economical digital multimeter that can't be beat. The #501 has the capabilities of full range units but is small enough to fit in your pocket. Comes with test leads, protective holster, instructions and battery. • 16 test ranges, 6 functions • 3-1/2 Digit LCD Display • Fuse protected
Quantity:

Electronic Specialties ESI585K Automotive Digital Multimeter Kit with Inductive RPM Pick-Up and Soft Case
	PRICE: $102.38
The ESI 585K comes with a zippered soft storage case to protect and store the digital multimeter and all the accessories. •Includes two sets of test leads, RPM pick-up, temperature probe, protective holster and instructions manual. Specifications: • Analog Bargraph Display and Large Digits • Measures Volts, Ohms, Amps, RPM, Frequency, Temp., Duty Cycle, Dwell, Continuity & more! • 42 Test Ranges • 10 Meg/Ohm Input Impedance • Fuse protected, safety leads and jacks • DC Volts 0-320mV, 3.2V, 32V, 320V, 1000V • AC Volts 0-3.2V, 32V, 320V, 750V • DC Current 0-320uA, 3.2mA, 32mA, 320mA, 10A • AC Current 0-320uA, 3.2mA, 32mA, 320mA, 10A • Ohms 0-320, 3.2K, 32K, 320K, 3.2M, 32M • RPM (Tach) 0-3200 RPM, 12,000 RPM • Dwell Angle 3 cyl, 4 cyl, 5 cyl, 6 cyl, 8 cyl • Duty Cycle 0-90% • Frequency(Hz) 0-320Hz, 3200Hz, 32kHz • Temperature -20C to 320C, -20C to 750C -4F to 320F, -4F to 1400F • Continuity Audible Beep • Diode Test Test current 0.6 mA, Open circuit voltage 3.0V
Quantity:

Electronic Specialties ESI595 Automotive Meter with PC Interface
	PRICE: $185.73
Features: • MS-Pulse Width function to test the on-time of fuel injectors • RS-232 PC Interface - Connect to your PC, CD/software included free of charge for viewing data on your computer. • Min/Max function captures the high or low readings for better diagnostic capability • Huge 2 inch high LCD display w/Bargraph and backlighting. Largest of any automotive meter! • Blow mould case included. • Desirable fused 20 Amp test range • Auto Power-Off - saves battery life • 4 Step Adjustable Trigger Level on RPM, Dwell, MS-Pulse Width, Duty Cycle and Frequency test ranges. • Special access panel for fuses and battery • Includes: Probe style test leads; Alligator Clip style test leads; Temperature Probe;RS-232 PC interface cable; Free CD software- Windows compatible; inductive RPM pickup with adjustable sensitivity; Blow mold case for storage. Specifications: • 57 Test Ranges • Test functions: AC/DC Volts ms-Period AC/DC Amps ms-Pulse Width Ohms Temperature Capacitance Diode Test Frequency Continuity Duty Cycle
Quantity:

Electronic Specialties ESI685 Digital Amp Clamp/Multimeter with Low Amp Capability
	PRICE: $143.69
The #685 is ideal for measuring current or parasitic drains, fuel injection systems, fuel pumps, charging systems, electric motors and more. Also measures AC/DC volts, resistance, frequency, duty cycle, capacitance, diodes and continuity! Capable of measuring as low as 10 milliamps! Features: 35 test ranges, auto power off, auto ranging, data hold, continuity beep, overload protection, 10 meg/ohm impedance Comes with pointed test lead set, soft carrying case, instructions, and 9 volt battery
Quantity:

Electronic Specialties ESI687 Low Current AC/DC Clamp Meter
	PRICE: $156.21
With the capability of measuring down to 1 milliamp (.001A), the #687 is a great tool for all low current applications. Especially for diagnosing parasitic drains! Clamp opening is large enough to fit over most negative battery cables. Applications: fuel injectors, fuel pumps, electric motors, battery drains, charging systems. Features: 35 Test Ranges 10 Test Functions Auto Power Off Auto-Ranging Data Hold Continuity Beep Overload Protection Clamp opening 5/8 inches 9 Volt Battery Included Carrying Case included TEST RANGES: DC Amps: 0-4A, 80A AC Amps: 0-4A, 80A DC Volts: 0-400mV, 4V, 40V, 400V, 600V AC Volts: 0-400mV, 4V, 40V, 400V, 600V Ohms: 0-400, 4k, 40k, 400k, 4M, 40M Frequency: 0-5Hz, 50Hz, 500Hz, 5kHz, 50kHz, 500kHz, 5MHz, 10MHz Capacitance: 0-40nF, 400nF, 4uF, 40uF, 100uF Duty Cycle: 0-.5%-99.0% Diode: Diode Test Continuity: Audible Beep
Quantity:

Electronic Specialties ESI695 Low Current AC/DC Probe for Graphing Meters, Scopes & DMM’s - 0 to 80 Amp
	PRICE: $127.16
Great tool for accurate measurement of low current. Use with your graphing meter or lab scope to view current waveforms on fuel injectors, fuel pumps, primary ignition coils and more. Also works very well with digital multimeters. Resolution of 10 milliamps is low enough for most parasitic drain testing. The 1/2" jaw opening will clamp over most negative battery cables for parasitic drain tests. Features: • Compatible with many lab scopes and graphing multimeters • Use to generate current waveforms for diagnostic analysis • Also works great with digital multimeters • Small jaw opening of 1/2 inches is convenient for tight spaces • Low battery indication, Auto power-off TEST RANGES: DC Amps 0-20A, 80A (resolution .01A) AC Amps 0-20A, 80A (resolution .01A)
Quantity:

Electronic Specialties ESI697 AC/DC CURRENT PROBE, 400A
	PRICE: $103.53

Quantity:

Fluke FLU115 Compact Multimeter
	PRICE: $176.48
The Fluke 115 is the solution for a wide variety of electrical and electronic testing applications. This true-rms meter provides easy one-handed operation in a compact package. • AutoVolt: automatic ac/dc voltage selection • Large white LED backlight to work in poorly lit areas • 10,000 uF capacitance range • Resistance, continuity, frequency and diode test • Measures 20 A (30 seconds momentary; 10 A continuous) • Compact ergonomic design for one-handed operation • Compatible with optional magnetic hanger (ToolPak™) • Min/Max/Average to record signal fluctuations • CAT III 600 V safety rated • Included: TL75 Test leads, holster, User’s manual and 9V battery (installed) • 3 Year Warranty
Quantity:

Fluke FLU117 Compact Electrician’s Multimeter with Non-Contact Voltage
	PRICE: $238.89
The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals, and schools. The 117 include integrated non-contact voltage detection to help get the job done faster. • VoltAlert™ technology for non-contact voltage detection • AutoVolt automatic ac/dc voltage selection • LoZ helps prevent false readings due to ghost voltage • Large white LED backlight to work in poorly lit areas • True-rms for accurate measurements on non-linear loads • Measures 20 A (30 seconds momentary; 10 A continuous) • 10,000 uF capacitance range • Resistance, continuity, frequency and • Min/Max/Average with elapsed time to record signal fluctuations • Compact ergonomic design for one-handed operation • Compatible with optional magnetic hanger (ToolPak™) for hands free operation • CAT III 600 V safety rated • 3 Year Warranty
Quantity:

Fluke FLU179 Fluke 179 True-rms Digital Multimeter with Temperature
	PRICE: $319.05
True-rms digital multimeter designed with a built-in thermomenter. Two tools in one.The new Fluke 179 has features and functions needed to troubleshoot your equipment and plant. •True-rms ac voltage and current for accurate measurements on non linear loads • Large digit displya with analog bargraph • Display backlight for work in dark area • Records minimum and maximum values to aid in troubleshooting • Free your hands with the magnetic hanger included in this combo kit • Durability backed up with a limited lifetime warranty • Includes thermocouple probe, integral holster and test leads • Temperature and capacitance
Quantity:

Fluke FLU80TK Thermocouple module - Converts DMM to Thermometer
	PRICE: $130.94
• Converts any 10 MegaOhm digital multi-meter into a thermometer via standard banana plugs. Accepts type K thermocouple with mini-connectors. Switch selectable for degrees Celcius or Fahrenheit. • Use with intrerchangeable thermocouples - 80PK bead probe thermocouple is included. Specifications: Basic accuracy: 0.5% +/-2 degreesC (0.5%+/-3.6 degreesF) Range: -50 to 1000 degreesC (-58 to 1832 degreesF) NOTE: Not for use with Fluke 7 series testers.
Quantity:

Fluke FLU87-5 True RMS Digital Multimeter
	PRICE: $362.49
• Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks • Large display digits and 2 level bright white backlight for increased visibility • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards • Improved sleep mode for long battery life • Relative mode to remove test lead resistance from low ohms measurements • Auto and manual ranging for maximum flexibility Unique function for accurate voltage and frequency measurements on adjustable speed • True-rms ac voltage and current for accurate measurements on non linear signals • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument, motor drives and other electrically noisy equipment • Measure up to 1000 V ac and dc • Measure up to 10 A (20 A for 30 seconds) • 10,000 uF capacitance range • Frequency to 200 kHz and % duty cycle • Peak capture to record transients as fast as 250 ?s • 4½ digit mode
Quantity:

Fluke FLU88VA Series V Deluxe Automotive Multimeter Kit
	PRICE: $453.13
A complete automotive diagnostic package. Improved measurement functions, trouble-shooting features and accuracy to solve more problems on conventional and hybrid vehicles. • Built-in thermometer lets you carry one less tool (temperature probe included). • Resistance, continuity and diode test. • RPM measurements with inductive pickup (included). • Millisecond pulse width measurements for fuel injectors. • Frequency to 200 kHz and % duty cycle. • Measure up to 1000 V ac and dc. • Measure up to 10 A, 20 A for up to 30 seconds. • 4_digits for precise measurements. Features: • Magnetic hanger to attach meter to the vehicle and free your hands for other tasks. • Min/Max-Average recording with Min/Max Alert to capture variations automatically. • Relative mode to remove test lead interference from low ohms measurements. • Large display digits and two-level bright white backlight for increased visibility. • Analog bargraph for fast changing or unstable signals. • Access door for fast battery changes without opening up the case. • Limited lifetime warrantee, UL and CSA approved. • Made in USA. 88V/A Combo Kit includes: • 88V Automotive Multimeter. • 1.5m long heat resistant silicone test leads. • Removable test probes to pierce corroded terminals. • Alligator clips. • Magnetic hanger to position and hold meter to steel surfaces. • Temperature probe. • Inductive RPM pick-up probe. • Two back probe pins. • Insulation piercing clip (red) • Durable case.
Quantity:

Fluke FLUAC285 SureGrip™ Aligator Clips
	PRICE: $29.29
• Multi-purpose tooth pattern grips anything from fine gauge wire to a 3/4" bolt • Nickel-plated steel jaws • 1000V CAT III, 600V CAT IV, 10A
Quantity:

Fluke FLUAC89 Insulation Piercing Clips
	PRICE: $50.13
• Safety-designed, clamp-type, piercing clip for use with automotive, marine, aviation or control circuits • Spring loaded stainless steel tip pierces insulated wires otherwise inaccessible test points. • Extremely small piercing point to retain maximum integrity of pierced insulation • High-quality insulation material resists breakage • Chemical and heat resistant • Pierces insulated wires from 30 AWG to 14 AWG • Current rating: 5A • Compatible with all standard 4mm diameter shrouded banana plug test leads. Recommended to use with Fluke TL24
Quantity:

Fluke FLUI410 AC/DC Current Clamp for DMMs - 400 Amp
	PRICE: $224.65
• Amp clamp with 2.1 meter output cable with shrouded banana plugs • Clamp accomidates up to 1.18" maximum conductor diameter • Zero erro adjustment • CATIII, 600V safety rating • 1 year manufacturer warranty Specifications: Accuracy: Less than or equal to 3.5%+0.5A Output levels: 1 mV/A Current Range: 1-400 Amp both AC and DC ; Frequency response: 3 kHz
Quantity:

Fluke FLUPV350 Pressure/Vacuum Module For Digital Multimeters
	PRICE: $390.55
• Digital pressure and vacuum measurements from a single module • Measures HVAC/R, hydraulic and pneumatic pressures to 500 psig (3447 kPa) • Measures to 29.9" Hg (76 cm Hg), (Not intended for measuring microns of vacuum) • Compatible with most popular digital multimeters (DMM)
Quantity:

Fluke FLURPM80 Inductive RPM Pickup for Fluke DMMs
	PRICE: $67.44
• Allows RPM measurement from spark plug wire • As with any inductive pickup, the RPM80 may not be compatible with all ignition systems (such as some aftermarket capacitive discharge ignitions) • Works with Fluke 78, 86 and 88 Automitve Digital Multimeters and the Fluke 97A Automotive ScopeMeter®
Quantity:

Fluke FLUTL220 SureGrip™ Industrial Test Lead Set
	PRICE: $71.47
• Starter kit for industrial applications. • Includes (2 each): Fluke AC220, TP220, and TL222 • 1000V CAT III, 600V CAT IV, 10A
Quantity:

Fluke FLUTL224 SureGrip™ Silicone Test Leads
	PRICE: $35.64
• 1.5 meter silicone-insulated wire reisists heat and cold • Reinforced strain relief • 1000V CAT III, 600V CAT IV, 10A
Quantity:

Fluke FLUTL75 Hard Point™ Test Lead Set
	PRICE: $27.15
• Comfort grip probes with PVC-insulated leads • Extra hard probe tips to provide long service life • Double insulated with internal strain-relief • Test lead lenght with probe: 54" • Current rating: 10A • Recommended for use with Fluke AC70A Alligator Clips
Quantity:

Midtronics MDTEXP1000AMP inTELLECT EXP Expandable Electrical Diagnostics Tester
	PRICE: $1,283.98
The inTELLECT EXP marks the next generation of handheld analyzers allowing you to diagnose every part of the electrical system, from the battery to the starter and alternator, more accurately and decisively than ever before. The platform combines the full functions of an advanced analyzer, digital multimeter, and data management tool - all in the palm of your hand. New Dynamic Battery Conductance Technology: • Combines additional test inputs, measurements, and processing power to deliver improved battery testing accuracy and decisions • Better, more accurate decisions on borderline batteries • Identify battery defects even at an extremely low voltage • Improve decision making with temperature compensation • Eliminate charge and retest with ‘during charge test’ algorithms Advanced electrical system diagnostics: • Diagnose entire starting system current draw, starting time and circuit resistance • Evaluate the spectral content of the alternator output voltage at the battery showing potential problems before the alternator fails • Conductance cable verification test - voltage drop test entire ciruit. • Complete multi-meter functionality with scope mode produces the ultimate electrical diagnostic tool Simple to use: • Easy for novice or experienced technician, icon based navigation. • Upgradeable for future test and feature upgrades, and platform expansion is trouble-free with the integrated SD memory card. EXP1000Amp Inlcudes: inTELLECT EXP, standard 10 ft. battery test cables, 10 ft. cable, drop test cables, stud adapters, AMP clamp, molded case Applications: 6 and 12 volt automotive battery testing (including AGM batteries), 12 and 24 volt charging, system diagnostics. Operating Range: CCA = 100 - 3000, CA = 100 - 3000, MCA = 100 - 3000, JIS = By JIS number, DIN = 100 - 1000 SAE = 100 - 3000, IEC = 100 - 1000, EN = 100 - 3000. Voltage Range: 100 mV - 68 V
Quantity:

Sheffield Research/GTC SR CM100 AC/DC Amp Clamp Digital Meter - 100 Amps
	PRICE: $221.86
• Small jaw: 1.2"(W) x 0.53" (D) (300x13.4mm) • Clamp opens up to 1/2 inch (12.5 mm) . • One rotary switch operation. • Large 4 digit LCD display. • AC/DC Voltage measurement up to 600 Volt. • AC/DC current measurement from 0.001 up to 100 Amps. • Relative measurement • One touch auto zero. • Peak Hold Function • Data Hold Function • Resistance measurement. • 2 readings per second sampling • Continuity check with audible indicator. • Protective hand guard. • Low battery indicator. • Auto power off. • 50 hrs in use battery life. • Soft carrying deluxe pouch. • Test leads and batteries included. Electrical Specifications: • DC Voltage: ± 2% ± 2 dgts., 600 V ac/dc maximum, 660Vrms overload protection • AC Voltage: ±1.5% ± 5 dgts., 50 to 500 Hz, 600 V ac/dc maximum, 660Vrms overload protection • DC Current: ± 2.5 % ± 10 dgts., 100 Amp. maximum, 150 Arms overload protection • AC Current: ± 2 % ± 10 dgts., 600 Amp. maximum, 150 Arms overload protection • Resistance: ±1% ± 3 dgts., 100KO 660Vrms overload protection • Continuity Test: Audible indicator (Buzzer) when circuit resistance is below 1000 O, max. voltage test < 3 Vdc.
Quantity:

Sheffield Research/GTC SR CM600 AC/DC Amp Clamp Digital Meter - 600 Amps
	PRICE: $174.03
• Clamp opens up to 1 inch (25.4 mm) . • One rotary switch operation. • Large 4 digit LCD display. • AC/DC Voltage measurement up to 600 Volt. • AC/DC current measurement up to 600 A. • Relative measurement • One touch auto zero. • Peak Hold Function • Data Hold Function • Resistance measurement. • 2 readings per second sampling • Continuity check with audible indicator. • Protective hand guard. • Low battery indicator. • Auto power off. • 50 hrs in use battery life. • Soft carrying deluxe pouch. • Test leads and batteries included. Electrical Specifications: • DC Voltage: ± 1% ± 2 dgts., 600 V ac/dc maximum, 660Vrms overload protection • AC Voltage: ±1.5% ± 5 dgts., 50 to 200 Hz, 600 V ac/dc maximum, 600Vrms overload protection • DC Current: ± 2.5 % ± 10 dgts., 600 Amp. maximum, 660Arms overload protection • AC Current: ± 2 % ± 10 dgts., 600 Amp. maximum, 660Arms overload protection • Resistance: ±1% ± 3 dgts., 660Vrms overload protection • Continuity Test: Audible indicator (Buzzer) when circuit resistance is below 100 O, max. voltage test < 3 Vdc.
Quantity:

Waekon WAE77002 Bed of Nails Test Lead Adapters - Pair
	PRICE: $28.42
• The Waekon Gold Bed of Nails Test Lead Adapters are designed to provide versatility and a lifetime of service. • Screw-on design fits threaded probe tips. • Includes a pair of test lead adapters • This product is part of the Waekon Gold Test Lead Adapter and Accessory Series • Made in the USA • Covered by Lifetime Warranty
Quantity:

Waekon WAE77004 The Bullet™ Wire Piercing Test Lead Adapters - Pair
	PRICE: $32.50
• The Waekon Gold Bullet Wire Piercing Test Lead Adapters are designed to provide versatility and a lifetime of service. • Super sharp wire piercing tip • Wire piercing is held firm with screw on "bullet" head. • Designed to fit threaded probe adapters. • Includes a pair of test lead adapters • This product is part of the Waekon Gold Test Lead Adapter and Accessory Series • Made in the USA • Covered by Lifetime Warranty
Quantity:

Waekon WAE77065 Waekon Gold Test Lead Master Kit
	PRICE: $137.48
A Master Set of premium Waekon Gold Test Leads, Jumper Leads and Probe Tip Accessories for DVOMs, lab scopes used for general circuit testing, organized in a rugged plastic case. Designed to fully address the circuit testing needs of the automotive service professional. • The Waekon Gold line is backed by Waekon’s Limited Lifetime Warranty. • Made in USA 77065 Waekon Gold Master Kit contents: 8’ Right Angle Ultimate Test Leads Set 8’ Universal Great Jumper Leads Set (4) Screw on Alligator Clips (2 red, 2 black) Screw on Bed of Nails Set Bullet Wire Piercing Probe Set 4 Inch Flexible Back Probe Set
Quantity:

Waekon WAE77202 Perfect Mate Spade Terminal Probe Adapter Set - 27 Piece
	PRICE: $91.01
The Perfect Mate Probe Adapter Tips are designed to be a perfect fit for most automotive connector pins. They work great for "hands free" jumper wire testing. The Tee Connection Adapter provides a solid connection for road testing. It acts like a universal breakout box for virtually any 2 or 3 pin connector on the vehicle. Includes: • 22 Assorted spade terminal tips LARGE 2-Male/2-Female MEDIUM 3-Male/3-Female SMALL 3-Male/3-Female EXTRA SMALL 3-Male/3-Female • 2 Screw-on banna plug test lead adapters • 3 Tee adapters • This product is part of the Waekon Gold Test Lead Adapter and Accessory Series • Made in the USA • Covered by Lifetime Warranty
Quantity:

Waekon WAE77203 Perfect Mate Round Terminal Probe Adapter Set - 31 Piece
	PRICE: $95.29
The Perfect Mate Probe Adapter Tips are designed to be a perfect fit for most automotive connector pins. They work great for "hands free" jumper wire testing. The Tee Connection Adapter provides a solid connection for road testing. It acts like a universal breakout box for virtually any 2 or 3 pin connector on the vehicle. Includes: • 26 Assorted round terminal tips EXTRA LARGE 2-Male/2-Female LARGE 2-Male/2-Female MEDIUM 3-Male/3-Female SMALL 3-Male/3-Female EXTRA SMALL 3-Male/3-Female • 2 Screw-on banna plug test lead adapters • 3 Tee adapters • This product is part of the Waekon Gold Test Lead Adapter and Accessory Series • Made in the USA • Covered by Lifetime Warranty
Quantity:

Waekon WAE77261 Universal Jumper Lead Set
	PRICE: $64.98
The Universal Jumper Leads with interchangeable probe ends and clips provide tremendous versatility for any circuit testing situation. Alligator clips and 4" long back probe tips allow for fast easy hook up to wires, terminals and connectors. A jumper lead coupler allows the 2 leads to be attached end to end creating a 16’ jumper wire. Heat and oil resistant coil cord and molded strain relief ends are designed to survive a lifetime in the harsh automotive environment. • The set includes: 2 - 8' universal jumper leads with 8/32 threaded ends, 4 - Screw on alligator clips and 2 - 4" back probe extensions. • This product is part of the Waekon Gold Test Lead Adapter and Accessory Series • Made in the USA • Covered by Lifetime Warranty
Quantity:

Waekon WAEGTL01 Great Test Leads™ Set
	PRICE: $42.65
• (2) 8 ft. coiled leads with stainless steel test probes at one end and standard banana plugs on the other. Also includes (2) alligator clip adapters • Can be used with all meters using standard banana plugs. May also be used as jump leads with included alligator clips installed.
Quantity:

Waekon WAEP95 Solenoid Tester
	PRICE: $27.82
Allows easy identification of an operating electrical field in components like solenoids or motors. Great for checking computer-controller output devices for operation.
Quantity:

Fluke FLU871207 Fuse - 1A/600V (5 pack)
	PRICE: $22.88
For use with Fluke Multimeters. Match up fuse voltage to your multimeter requirements.
Quantity:

Fluke FLU892583 Fuse - 15A/600V (1 fuse)
	PRICE: $15.43
For use with Fluke Multimeters. Match up fuse voltage to your multimeter requirements.
Quantity:

Fluke FLUAC72 SureGrip™ Push-On Alligator Clip Set
	PRICE: $22.24
• Slide on style for hard point test lead probes (such as Fluke TL71 and TL75). • Jaws open to 8mm. • Includes 1 black and 1 red insulated alligator clips.
Quantity:

Fluke FLUTPAK Meter Hanging Pack
	PRICE: $53.61
Now you can hang your meter almost anywhere with the new Fluke TPAK accessories kit. TPAK includes a universal hanger, a magnet, and 9-inch (43 cm) and 17-inch (23 cm) "hook-and-loop" hanger straps. The universal hanger is designed to fit into the special module on the back of the meter. The universal hanger allows you to hang your meter on a nail, hook or other object. You can add a piece of rope, flexible wire or cable to hang the meter in almost any position.
Quantity:

© 2003-2010 Tool Zone, Inc. All Rights Reserved. Tool Zone is a Federally Registered Trade Mark.

Cart Summary
Items:
Value:

[ View Cart ] [ Checkout ]

Join Our Newsletter

Trusted Commerce

Tool Zone Specials

Retail Store Information