• ISO 9001 certified manufacturer
• 3-1/8" bore spindle is supported by two tapered and one ball bearing
• Chrome molybdenum headstock gears are hardened, ground, and shaved
• Universal gearbox allows inch, metric, diametral, and module pitch threads, no change gears required
• Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
• T-slotted compound slide featuring a four-way tool post
• One-piece cast iron base absorbs vibration allowing heavier cuts
• High quality ANSI Class 50 wear-resistant cast iron bed ways are hardened and ground
• Removable gap allows up to 23-5/8" diameter work
• Five position automatic carriage stop increases productivity
• Attractive chrome control levers, dials, and knobs complete this impressive package
• Tolerance test certificate included
Jet GH-1840ZX Standard Equipment-
• 10" 3-jaw chuck with top reversing jaws
• 12" 4-jaw chuck
• 12" Face plate (16" models)
• 16" Face plate (18'' models)
• Four-way tool post
• Follow rest
• Large capacity steady rest
• Fully integrated coolant system
• Full length splash guard and coolant return
• Large easy to use foot brake
• Articulating halogen work lamp
• Centrally located controls with jog button
• Threading dial
• Mounting pads and levelers
• Spindle sleeve (MT-7 to MT-5)
• Dead center
• Live center
• Tool box and adjusting tools
Jet GH-1840ZX Product Specifications-
• Swing Over Bed (in.): 18
• Swing Over Cross Slide (in.): 11
• Swing Through Gap (in.): 25-7/8
• Length of Gap (in.): 12-1/4
• Distance Between Centers (in.): 40
• Spindle Bore (in.): 3-1/8
• Spindle Mount: Dl-8
• Spindle Taper (With sleeve): MT-7 (MT-5)
• Number of Spindle Speeds: 12
• Range of Spindle Speeds (RPM): 25-1,800
• Number of Longitudinal and Cross Feeds: 122
• Range of Longitudinal Feeds (in./rev.): 0.0015 to 0.0913
• Range of Cross Feeds (in./rev.): 0.0006 to 0.0365
• Number of Inch Threads: 61
• Range of Inch Threads: 1-5/8 to 72
• Number of Metric Threads: 24
• Range of Metric Threads (mm): 0.05 to 20
• Maximim Tool Size (in.): 1x1
• Maximim Compound Slide Travel (in.): 5-1/8
• Maximim Cross Slide Travel (in.): 9
• Maximim Carriage Travel (in.): 35
• Tailstock Spindle Travel (in.): 5
• Tailstock Taper: MT-5
• Follow Rest Capacity (in.): 1/2 to 3-1/2
• Steady Rest Capacity (in.): 3/8 to 7
• Width of Bed (in.): 13-3/8
• Overall Dimensions (in./L x W x H): 97-1/2 x 40 x 48-7/8
• Motor: 7-l/2HP, 3Ph, 230/460V Prewired 230V
• Net Weight (Ibs.): 5980
Taper Attachment Features-
• Specially designed for each model
• 10 degree inclusive cutting capacity
• Mounts to predrilled and tapped holes
• Factory installation available