The 28-276 includes stand, 3/4 HP, 120/240 Volts motor and switch, quick release tension lever, 4" dust collection port, 9-spoke wheel, blade and belt guards, arbor, motor pulleys and V-belt, blade guides, wood-cutting blade.
• Nine-spoke precision-balanced wheels.
• Full 16" x 16" cast-iron table tilts 45° right and 3° left for beveling operations
• Quick release tension lever
• 4" integral dust port
• Cast-iron trunnions table support
• Capacity to cut stock up to 6-1/4" thick (12-1/4" with height attachment)
• Lower blade guides have safe, accurate, micrometer adjustment
• Lower guides angled to support blade to within 3/4" of table work surface ensures accurate cutting
• Two-speed pulley position
• Fully-adjustable, upper and lower blade guides and blade support. Bearings maintain proper blade alignment
Specifications-
• Motor: 3/4 HP, 120/240V (wired 120V), 1 Phase, 60 Hz
• Motor Control: N/A
• Blade Width: Max. 3/4"
• Blade Length: Min. 91-1/2"; Max. 94"; Standard 93-1/2"; Length (with 28-984 height attachment): Max. 106"; Min. 103-1/2"; Standard 105"
• Speeds: 3,300 SFPM
• Capacity Blade to Frame: 13-3/4"
• Capacity Under Guide and Wheel: 6-1/4"; With 28-984 height attachment: 12-1/4"
• Max Rip To Right Of Blade: N/A
• Max Rip To Left Of Blade: N/A
• Table Size: 16" x 16"
• Table Size Front to Center of Blade: N/A
• Table Tilt: R-45 degrees; L-3 degrees
• Table Height: 42-3/4"
• Height: 65-1/2"
• Width: 31"
• Depth: 17-1/2"
• Weight: 201 Lbs.