The 43-455 includes 5 HP, 1 Phase, 230 Volts, TEFC motor with full voltage magnetic starter, motor pulley, Poly-V belt drive, two 10" cast-iron extension wings, micro-adjust fence and guard assembly, 1-1/4" spindle, table inserts, starting pin, two-speed spindle pulley, wrenches.
• The spindle, housing, motor, raising and lowering mechanism are a single self-contained unit, securely assembled to the underside of the table for absolute 90 degree spindle-to-table alignment.
• The rugged drive spindle assembly and permanently lubricated ball bearings are preloaded to prevent distortion at high speeds which assures accurate, chatter-free shaping.
• Massive 30" X 27" table (with standard cast-iron extension wings) provides extra support for shaping large work. Also, a precision ground face and ribbed under-table-construction prevents warping.
• Precision milled 3/8" X 3/4" T-slot, miter slot accommodate miter gage, sliding miter jig and other accessories for holding workpiece.
• Conveniently-grouped controls are at the front of the machine within easy reach of the operator from his normal working position.
• Deep-tapered spindle design allows for easy changing of accessory spindles from 1/2" to 1-1/4" to permit use of a wide variety of shaper cutters. Table opening size can be varied, as needed, by removing special table insert rings.
• Poly V-Drive System transmits more efficient torque to the spindle.
Specifications-
• Motor: 5 HP, 230V, 1 Phase, 60 Hz
• Spindle Diameter: 1-1/4"
• Spindle Travel: 3"
• Maximum Height Above Table: N/A
• Capacity: (under nut) 5-1/4"
• Speeds: (Forward and Reverse) 7,000 & 10,000 RPM
• Brake for Spindle: N/A
• Table Size: 40" x 27"
• Table Height: 34"
• Insert Opening Diameters, O.D.: 6-3/4", 3-1/2", 3", 1-3/8"
• Sliding Table Size: N/A
• Sliding Table Travel: N/A
• Fence Size: 16-1/2" x 1-3/8" x 5"
• Length: 27"
• Width: 40"
• Height: 50"
• Weight: 456 Lbs.