JessEm's lastest lift solution for the router table is the new MAST-R-LIFT EXCEL. This product combines our solid phenolic MAST-R-TOP in black, with all the features of our MAST-R-LIFT and more. This combination was designed to allow the addition of two great new features, a micro adjust dial which protrudes slightly beyond the edge of the tabletop and rotates independently of the lift mechanism. This feature allows you to "zero-out" the MICRODIAL and then accurately crank the router up at a ratio of 1/64 inch per 1/4 turn of the crank. The dial is scaled for micro adjustments as intricate as .001". Extremely precise adjustments to the router bit cutting height can now be performed faster and easier than ever before.
The second feature to this new product is an integrated dust port that is machined into the lift's housing underneath the table top. This design virtually sucks up the chips just as they are cut by the router bit. This design feature will literally extend the working life of the router motor. When mounted to the router table, the router motor is positioned upsid- down leaving the internal motor vulnerable to an accumulation of dust and pitch deposits. This causes the motor to heat up over time and eventually fail. JessEm's new lift design removes the chips before they can reach the router, ultimately prolonging the life of the motor through more efficient chip extraction.
The black phenolic MAST-R-TOP includes our MAST-R-TRAC with a Miter Track in between two T-tracks. this heavy gauge 6061 aluminum extrusion is anodized in red and ready to attach jigs, hold-downs or a miter gauge. The lift mechanism is raised and lowered by an offset right-angle gearbox positioned in the right front corner, under the table top. The gearbox features a red anodized aluminum "balanced ball crank" handle reminiscent of the classic milling machines used in metalworking. The gearbox drives the lift mechanism via a precision timing belt. The lift mechanism utilizes our patented adjustable tensioning design for reliable operation with the utmost accuracy and no backlash.
The new MAST-R-LIFT EXCEL will accept the Porter Cable model 7518 out of the box, and accepts additional routers with cylindrical motor housings with the use of a reducer collar (sold separately). The centerhole in the tabletop is machined with a 3-5/8" diameter TAB-LOC centerhole to accept up to a 3-1/2" diameter raised panel bit. An insert ring with a 1-1/2" diameter centerhole for most smaller bit diameters, an insert ring wrench, starting pin and hex key wrench are also included. Additional insert rings sets are available separately.
JessEm Mast-R-Top Features & Specifications:
The ultimate tabletop material for today's hi-tech woodworking machinery is JessEm's PVC coated phenolic. Phenolic is one of the strongest, most stable and durable materials available for an industrial strength work surface. Its widespread use in military and aerospace applications says it all.
Our tabletop is 3/4" thick and guaranteed not to warp, sag, swell or rust. Phenolic is the step up material for todays woodworking pros and virtually renders melamine an obsolete option for long term professional use.
JessEm Mast-R-Lift Features & Specifications:
Beautifully finished with red and black anodized components, the MAST-R-LIFT is the sequel to JessEm's original ROUT-R-LIFT. Precision machined in premium 6061 aluminum, this is the top of the line for JessEm's lift systems.
Designed for top cabinetmakers, furnituremakers and other custom woodworking professionals, the MAST-R-LIFT is built for long-term professional use. Featuring a more streamlined design and increased performance with a full
3-3/4" of vertical travel.
Designed specifically for the Porter Cable 7518 and to fit similar cylindrical motor housings with the use of a reducer collar. The insert plate centerhole is machined to accept up to a 3-1/2" raised panel bit and includes a 1-1/2" insert ring.
JessEm Mast-R-Fence Features & Specifications:
The most advanced router table in its price range. The MAST-R-FENCE looks as beautiful as its function. Featuring a dual track fastening system with adjustable scales that can be set for a zero-reference and fast, repeatable set-ups. We also added a forward tilted scale along the top face for our Fence-Stop accessory (available separately). Constructed of precision machined 6061 aluminum with a red-hot anodized finish. The fence glides smooth in the tracks and locksfirm with a twist of our "high-boy" lock-down knobs.
JessEm found that solid phenolic is the ultimate material for JessEm's sub-fences. Our PVC coated phenolic offers the same slick characteristics of UHMW plastic with far greater stability and durabiliy. Our inovative dustport features a large chamber with a clear acrylic housing that won't clog up and accepts a 2-1/4" diameter vaccuum hose fitting. we also include a set of shims for offsetting the out-feed sub-fence for jointing operations.
The MAST-R-FENCE also offers enough T-tracks front and back for any type of jig or hold down configuration you can dream up. Fits all tabletops from 24" to 32" wide and from 1/2" to 1-1/2" thick.
The MAST-R-FENCE is a truly unique design in router table fences which sets this apart from the pack. Quality extruded and anodized for durability this fence will hold up to the toughest routing. Fits all tables from 24" to 32" wide and 1/2" to 1-1/2" thick.
The fence glides back and forth on guide rails and locks in position with two 1-1/2 diameter by 4" long knobs. Each of the guide rails contain scales that move to provide a "zero" reference for any bit.
JessEm Mite-R-Slide Features & Specifications:
The JessEm MITE-R-SLIDE is a unique new miter gauge accessory for the router table. Designed to be mounted to the backside of the fence and slide smoothly across the table on a polished steel bar positioned above the fence. This innovative accessory is engineered to perform precision-machined square or angled cope cuts, crosscuts and other end milling operations with renewed accuracy on a router table.
The MITE-R-SLIDE offers greatly improved performance and increased precision over similar cuts made with a miter gauge traveling in a single miter track in the tabletop.
Built from precision machined 6061 aluminum components anodized in red and black, the MITE-R-SLIDE features a robust industrial design and is engineered for long-term professional use. The miter gauge rotates 45 degrees in both directions and features positive detents every five degrees, including a 22-1/2 degree position. Click into your desired angle and lock it in with a twist of our heavy-duty handle, machined from solid aluminum with a knurled grip and a red anodized finish.
The fence on the miter gauge features a heavy-duty aluminum extrusion with a T-track along the top face for attaching different types of hold down accessories. The fence also slides in a second T-track located on the backside to position the fence flush to the router table's fence at various angles. The fence locks into position easily with the twist of two solid brass knobs and includes a replaceable sub-fence made of solid phenolic. The MITE-R-SLIDE can also be rolled up over the bar and positioned behind the fence when not in use. You will experience tighter fitting joints from the accuracy of this well designed product.
Bottom Line: The Mite-R-Slide Offers Greatly Improved Performance
What Others Are Saying About The JessEm Products:
"It isn't very often that a tool has impressed me to the point of sending a note to the manufacturer. But your router table is the rare exception. I have been using it for all types of work, including cutting thru dado, rabbet and other types of edge forming work. Additionally, the unique slide action of the Rout-R-Slide allowed other wood machining that has been impossible on my regular table. And, the accuracy is excellent." "I could go on for pages about how satisfied I am with your table router system. But let me just say the performance is superior." - Danny Proulx, Cabinetmaker for 30 years, magazine writer and author.
"You have put a lot of thought into producing a product that is a pleasure to use, being simple to adjust and accurate in all modes. What a pleasure to have a product that does everything the manufacturer claims it can do. I have even produced half blind Dovetails using the Rout-R-Slide. This table is an asset to any workshop." - David Lees, Carpenter and Woodturner for over 30 years, Head of Carpentry and Job Training College England - now living in Victoria, BC.