• Allows the mounting of hoists or rigging from an overhead load bearing structure
• Clamp jaw is designed to reduce flange stress by distributing load away from I-beam flange edge
• Quick and easy to install - requires no tools
• Can also be used for lifting structural beams
• Proof tested and certified
• Complies with ANSI/ASME B30.20 standards
Caution-
• Read owners manual for additional warnings and precautions before use.
• Failure to read, understand and follow all instructions can result in serious injury.
• Do not exceed rated capacity.
• Use clamp only if authorized and properly trained.
• Do not move unbalanced load.
• Not for use in explosive environment.
Product Specifications-
• Rated Capacity(lbs.): 4000
• Beam Flange Width(In.): 2-31/32-8-21/32
• Dim.(In.) Max A.: 9-21/32
• Min. B: 7-3/32
• Max. B: 14-11/64
• C: 2-29/32
• D: 1/4
• E: 9-9/32
• Max. F: 5-5/16
• Min. F: 3-35/64
• Min G: 1-3/16
• H: 13/16
• Weight(lbs) 14
• Carton Pack: 1