• Allows the mounting of hoists or rigging from an overhead load bearing structure
• Clamp jaw is designed to reduce flange stress by distributing load away from I-beam flange edge
• Quick and easy to install - requires no tools
• Can also be used for lifting structural beams
• Proof tested and certified
• Complies with ANSI/ASME B30.20 standards
Caution-
• Read owners manual for additional warnings and precautions before use.
• Failure to read, understand and follow all instructions can result in serious injury.
• Do not exceed rated capacity.
• Use clamp only if authorized and properly trained.
• Do not move unbalanced load.
• Not for use in explosive environment.
Product Specifications-
• Rated Capacity(lbs.): 6000
• Beam Flange Width(In.): 3-15/16-9-2/32
• Dim.(In.) Max A.: 11-5/8
• Min. B: 9-27/32
• Max. B: 17-11/32
• C: 4/-21-32
• D: 5/16
• E: 10-1/4
• Max. F: 6-11/16
• Min. F: 4-11/32
• Min G:2-11/64
• H: 1
• Weight(lbs) 27
• Carton Pack: 1