• 22 wide suspended drum supported on both ends with a truss-like carriage arm
• Sand 22 in a single pass or 44 in two passes
• 5 x 22 precision-machined and balanced aluminum extruded drum operates at 1600 RPM
• 3/32 per turn height adjustment
• Depth gauge with locking stop
• Drum is easily aligned to table surface
• Precision-flattened reinforced steel conveyor bed
• Zinc-plated steel tension rollers mount next to drum
• Drum height and downward pressure are adjustable, eliminating snipe
• Sealed and pemanently lubricated ball bearings mounted on both ends of drums
• Minimum of 600 CFM dust collection recommended
• No-give conveyor offers infinately variable feed rate, from 0 to 10 feet per minute
• Height adjustment handle allows a tight gripand ability to make radical height changes quickly
• Cast aluminum stand construction, zinc-plated steel bed, centerless ground column tube
• Minimal assembly required
• 20 Amp service required
Standard Equipment-
• Drum adjuster, depth gauge and tension rollers
• One 80 grit abrasive strip
• One 100 grit abrasive conveyor belt TRACKERS
• TUFTool
• 4 dust port
OPTIONAL ACCESSORIES Stock Number Description-
• 60-0505 Cleaning Stick
• 61-1012 Poly Conveyor Belt
• 98-0070 Rack'NRoll
• 98-0130 Caster Set (Set of 4)
• 98-0120 ProScale Digital Readout
• 98-2201 Infeed and Outfeed Tables
• Ready-to-Cut Abrasives,36 to 220 Grit
• Ready-to-Wrap Abrasives, 24 to 220 Grit
Product Specifications-
• Max. Width (in.) 44 (Two Passes)
• Min. Length (in.) 2-1/4
• Max. Thickness (in.) 4
• Min. Thickness (in.) 1/32
• Overall Dimensions(HxWxD/in.) 52x41x41
• Drum Dimensions(dia. x L/in.) 5x22
• Drum Speed (RPM) 1,600
• Drum BearingDiameter (in.) 1
• Dust Port Diameter(in.) 4
• Conveyor Motor 43 in.-lbs. Torque,Direct Drive, DC
• Conveyor VariableFeed Rate (FPM) Motor (TEFC)Net Weight (lbs.) 1 to 10 1-1/2HP, 1Ph,110-120V 390