• T22" wide suspended drumsupported on both ends with a truss-like carriage arm
• Sand 22" in a single pass or 44" in two passes
• 5" x 22" precision-machined and balanced aluminum extruded drum operates at 1,600 RPM
• 3/32" per turn height adjustment
• Depth gauge with locking stop
• Drum is easily aligned to table surface
• Precision-flattened reinforced steel conveyor bed
• Zinc-plated steel tension rollers mount next to the drum
• Drum height and downward pressure are adjustable, eliminating snipe
• Sealed and permanently lubricated ball bearings mounted on both ends of drum
• Minimum of 600 CFM dust collection recommended
• No give conveyor offers infinitely variable feed rate, from 0 to 10 feet per minute
• Height adjustment handle allows a tight grip and ability to make radical height changes quickly
• Cast aluminum stand construction, zinc-plated steel bed, centerless ground column tube
• Minimal assembly required
• 20 Amp service required
Product Specifications-
• Max. Width (in): 44 (Two passes)
• Min. Length (in): 2-1/4
• Max. Thickness (in): 4
• Min. Thickness (in): 1/32
• Overall Dimensions(H x W x D/in.): 52 x 41 x 41
• Drum Dimensions(dia. x L/in.): 5 x 22
• Drum Speed (RPM): 1,600
• Drum Bearing Diameter (in): 1
• Direct Drive, DC Dust Port Diameter (in): 4
• Conveyor Motor: 43 in.-lbs. Torque, Direct Drive, DC
• Conveyor Variable Feed Rate (FPM): 1 to 10
• Motor (TEFC): 1-3/4HP, 1PH, 110V
• Net Wt. (lbs.): 402