561188 The TS 75 EQ Portable Plunge Cut Saw
Festool TS saws deliver panel saw precision in a versatile, portable design. Festool invented the guide rail over 40 years ago, and have continuously set new and higher standards for precision cutting with the plunge cut saws.
Faster-
• Faster with the zero clearance guide rail and splinterguard.
• FastFix saw blade change requires just a few simple steps.
• Integrated dust extraction design reduces clean-up time and provides for a healthier work environment.
Easier-
• A plunge cut saw can to the work of a table saw, sliding miter saw, radial arm saw, and panel saw.
• MMC electronics deliver soft-start, constant speed under load, stepless speed control, and temperature and overload protection.
Smarter-
• Guide rail delivers glue-ready cuts the time around, eliminating costly rework and material waste.
• Cost saving- triple motor bearing extends service life and three bearings take the load.
Cut as straight as a panel saw with the versatility of a portable saw. The TS 75 EQ has a multitude of uses, from fine cabinetry to cutting spiral staircase steps; from truing rough lumber to cutting out window frames
in renovation work. The TS 75 is a larger saw with more power and greater cutting depth than the TS 55.
This translates, of course, to greater safety for the user. Try the TS 75 once and you’ll never look back.
• Power- The TS 75 is out most powerful plunge cut saw, proving enough power to slice through the toughest of materials with little concern for swirl or burn marks.
• Depth of Cut- At 2-3/4" depth of cut, the TS75 can power through thick stock with ease.
• Slip Clutch- The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
• Guide Rail Guidance- When used with Festool guide rails, you have ultimate control over the TS saw for perfectly straight cuts. Add the replaceable splinterguard, and a splinter-free cut is achievable on both sides of the blade.
• Plunge cutting action- Simple depth adjustment allows you to expose only the part of the blade necessary for the cut. The plunge action allows cut placement anywhere on the cut line for straight cuts or cut-outs into material.
• Scribe Line = Cut Line- the TS 75 makes the actual cut right on the edge of the scribe line, even on bevel cuts.
• Riving Knife- Spring-loaded riving knife (splitter) retracts into the housing during plunge cuts. The riving knife keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback, leaving you in control of the operation.
• MMC electronics- Variable speed allows you to match the speed of the saw to material. The electronics also maintain a consistent speed under load, improving cut performance and protecting the saw's motor from thermal and current overload.
• FastFix saw blade changing system- The saw blade can be changed in just a few simple steps. This means you can easily change the blade to suit the material you are working on, saving money.
TS 75 EQ Includes:
• 1 high-quality 36-tooth carbide blade
• 75" (1900 mm) guide rail
• Slip clutch
• Limit stop
• Plug-it cord
• In Systainer 5
Specifications-
• Power consumption: 1600 watts/13 amps 120 v AC
• Saw blade speed: 1,350 - 3,550 rpm
• Saw blade diameter: 8-1/4" (210 mm)
• Bevel cuts: 0 degree - 45 degree
• Cutting depth on guide rail: 2-3/4" (70 mm) straight down and 2-1/8" (55 mm) at 45 degrees
• Cutting depth we/out guide rail: 2-15/16" (75 mm) straight down
• Arbor size: 1.101" (30 mm)
• Weight: 13.6 lbs. (6.2 kg)