|Festool 561432 TS 55 EQ Portable Plunge Cut Saw|
561432 TS 55 EQ Portable Plunge Cut Saw
Festool TS saws deliver panel saw precision in a versatile, portable design. Festool invented the guide rail over 40 years ago, and have continuously set new and higher standards for precision cutting with the plunge cut saws.
Faster with the zero clearance guide rail and splinterguard.
FastFix saw blade change requires just a few simple steps.
Integrated dust extraction design reduces clean-up time and provides for a healthier work environment.
A plunge cut saw can to the work of a table saw, sliding miter saw, radial arm saw, and panel saw.
MMC electronics deliver soft-start, constant speed under load, stepless speed control, and temperature and overload protection.
Guide rail delivers glue-ready cuts the time around, eliminating costly rework and material waste.
Cost saving- triple motor bearing extends service life and three bearings take the load.
Portable circular saws often react unexpectedly. They wander offline and are subject to play. Its a quick way to ruin expensive material. But not if you use the Festool plunge saw and guide rail. The saw blade makes its cut absolutely straight and splinter-free. Perpendicular or even beveled, the choice is yours. The cut line is the same for either cut. As a plunge-cut saw, it can start and end a cut accurately anywhere on the material. Equally important, on the TS 55, the saw blade and riving knife retract into the housing, unlike conventional saws, where the blade guard retracts instead of the blade, which means greater safety.
Guide Rail Guidance- When used with Festool guide rails, you have ultimate control over the TS saw for perfectly straight cuts. And the replaceable splinter guard, and a splinter-free cut is achievable on both sides of the blade.
Scribe line = cut- Exact cuts, even at an angle. The TS 55 makes the actual cut right on the edge of the scribe line, even on bevel cuts.
Plunge cutting action- Simple depth adjustment allows you to expose only the part of the blade necessary for the cut. The plunge action allows cut placement anywhere on the cut line for straight cuts or cut-outs into material.
Rotating dust port- More freedom of movement; fewer dangerous obstacles. The suction hose never gets tangled or in the
way and can always remain attached for maximum dust collection.
FastFix saw blade changing system- The saw blade can be changed in just a few simple steps. This means you can change the blade more easily to suit the material you are working on, saving money.
MMC electronics- Maximum adaptation to the working material, controlled speed and temperature monitoring.
Triple motor bearing- The triple motor bearing improves the smoothness of cutting action and extends the service life.
Spring-loaded riving knife or splitter- Its always there when you need itand moves out of the way when you dont. The spring-loaded riving
knife or splitter retracts into the housing during plunge cuts.
Splinter guard on both sides- Splinter-free cuts on both sides of the cut line. The attachable splinter guard and the guide rail make it possible.
TS 55 EQ Includes:
1 high-quality 48-tooth carbide blade
55" (1400 mm) guide rail
In Systainer 4
Power consumption: 1200 watts/10 amps 120 v AC
Saw blade speed: 2,000 - 5 rpm
Saw blade diameter: 6-1/4" (160 mm)
Bevel cuts: 0 degrees - 45 degrees
Cutting depth on guide rail: 1-15/16" (50 mm) straight down and 1-7/16" (37 mm) at 45 degrees
Cutting depth w/out guide rail: 2-1/8" (55 mm) straight down
Arbor size: .787" (20 mm)
Weight: 9.92 lbs. (4.5 kg)