Norco 82302B 1/2 Ton Capacity High Lift Wheel Dolly Norco 82302B 1/2 Ton Capacity High Lift Wheel Dolly
Features:
For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level.
• Heavy duty lift arms made with ball bearing conveyer rollers which allow easy rotation of wheels for alignment with bolt pattern.
• 7-1/2" of side to side lift arm adjustment eliminates the trial and error method of aligning the rim's lug holes with the wheel drum.
• A 1000 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation.
• The winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle.
• A hydraulic jack tilts the lift arms in order to match the angle of the spindle.
• Safety chain provided to secure tires and wheels to the dolly.
• Maneuverability is made easy by means of two rear mounted ball bearing caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving.

Specifications:
Capacity: 1/2 Ton
Low Lift Height: 3"
High Lift Height: 41-1/4"
Lift Arms Width: 24-1/4"
Lift Arms Length: 21"
Lift Arms Tilt Angle: -2 degrees to +30 degrees
Left Side To Side Adj.: 3-1/4"
Right Side To Side Adj.: 4-1/4"
Overall Length: 45-3/4"
Overall Width: 43-3/4"
Overall Height: 62"
Support Leg Clearance: 6-1/4"
Shipping Weight: 315 Pounds
'); } else { document.write('Close window'); } window.focus(); //-->