Powermatic 1791261 201 22 Powermatic 1791261 201 22" Planer 1 Phase Motor
Features:
This 1,300 lb. heavy-duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives. The hood comes standard with a 5" dust port for easy attachment to any dust collection system. The cutterhead is complete with four high speed steel knives and turns at 4,800 rpm producing 19,200 cuts per minute. The anti-kick back fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The well designed infeed and outfeed rollers are fitted with roller bearings for long roller life. The sectional infeed and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed roller facilitates both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. You may easily raise the massive ribbed cast iron, ground finished table 1/16" with each turn of the hand wheel. This planer is perfect for the small to medium shop with continuous planing requirements.

• Cast iron 1300 lb. construction for solid performance without vibration
• 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
• Segmented infeed roller with sectional chipbreaker allows multiple board planing
• 4-knife head offers 19,200 cuts per minute and widest capacity in its class
• Roller bearing-mounted feed rollers for long life
• Adjustable bed rollers allow smooth feeding of rough or finished workpieces
• Oversized cast iron table travels on 2 large lead screws for heavy duty support

Specifications:
Maximum Planing: 22"
Maximum Planing Thickness: 9-1/4"
Maximum Depth of Cut: 3/16"
Minimum Planing Length: 10"
Cutterhead Diameter: 3-1/4"
Cutterhead Speed: 4800 RPM
Cuts Per Minute: 19200
Feed Rate 20 and 30: FPM
Outfeed Roller Diameter: 3"
Number of Knives: 4
Table Size: 32 1/4" x 24"
Dust Port Diameter: 5"
Dust Collection Minimum CFM Required: 900 cu.ft/min
Bed Rollers Adjustable from Front: 2"
Segmented Infeed Roller Diameter: 3 "
Table Height Adjust: Manual 1 Turn = 1/16"
Table Support: 2 column
Tool Supplied: Tool kit
Number of Speeds: 2
Motor Power: 7-1/2 HP
Motor Phase: 1 Ph
Motor Voltage: 230 V
Height: 59 inch
Width: 49 inch
Length: 42 inch
Net Weight: 1350 pound
'); } else { document.write('Close window'); } window.focus(); //-->