Powermatic 1791293 OES9138 9 Powermatic 1791293 OES9138 9" x 138" Oscillating Edge Sander, 3HP, 3Ph, 230/460V (Prewired 230V)
Features-
Oscillating Edge Sander
The new oscillating edge sander from Powermatic is full of features to handle all your edge sanding needs.

The large 11 3 /4" x 48" table travels a full 8" in vertical height to accommodate all parts from tall to small. It will also tilt neg. 5 degrees and out to pos. 45 degrees for all the angles you need to run.

The cast iron platen is a generous 48" x 9 1 /2" and covered with graphite for production sanding offering super support and cooler running toextend belt life. With 24 oscilla-tions per minute you can use the entire belt face without burning.

A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with 2 sealed ball bearings for trouble-free performance.

Product Feature-
• 3HP motor with 9" x 138 3 /4" abrasive belt
• Oscillates 24 cycles per minute
• 9" x 48" platen with graphite pad
• Dual dust collection
• Large 11-3 /4" x 48" front worktable with 8" vertical travel tilts from neg. 5 to pos. 45 degrees and includes miter head for angle work
• Big 18" radius end worktable has 6" vertical travel and tilts neg. 40 to pos. 45 degrees
• Precision balanced 9" diameter drive drum and 4" diameter. Rubber coated idler pulley
• Rugged bearing assisted tensioning device
• Convenient on/off controls
• Heavy duty oscillating gearbox and shaft
• Dual dust collection ports keep the work area clean and extends the life of your abrasive belt.
• 1 Year Warranty

Benefit-
Power to handle the largest work pieces
Keeps belt cleaner for longer abrasive life and better finish
Gives the largest work surface in its class
Keeps work area clean and extends abrasive life
Supports the largest work pieces at a comfortable work height and accommodates virtually any angle
Allows for any angle and radius work at the optimum height
Gives positive drive and rigid tracking
Fast belt changing and quick adjust tracking
Ease of use for operator
For long maintenance-free use

Product Specifications-
Motor HP/Voltage/Phase: 3HP, 230V 1PH
Motor HP/Voltage/Phase: 3HP 230/460V 3PH
Elect. Controls: 24V Magnetic
Belt Size (in): 9 x 138-3/4
Platen Size (in): 9-1/2 x 48
Table Working Height (in): 34-1/2 to 40-3/4
Main Table Size (LxW/in): 11-3/4 x 48
Main Table Tilt: 5 deg. in 45 deg. out
End Table Tilt: 40 deg. in 45 deg. out
End Table Size (in/radius): 18
Belt Speed (SFM): 4000
Osc. Per Minute: 24
Drum Diameter (in): 4 Outboard, 9 Drive
Dust Connect Diameter: 2 - 4"
CFM Required: 1100
Shipping Weight (lbs): 870
Overall Dimensions (LxWxH/in): 83 x 32 x 50
Shipping Dimensions (LxWxH/in): 86 x 27 x 44-1/2
PN Accy. Sanding Belt (1) 60 Grit 9" x 138 3 /4": 6078029
PN Accy, Sanding Belt (1) 80 Grit 9" x 138 3 /4": 6078030
PN Accy, Sanding Belt (1) 100 Grit 9" x 138 3 /4": 6078031
PN Accy, Sanding Belt (1) 120 Grit 9" x 138 3 /4": 6078032
PN Accy, Sanding Belt (1) 150 Grit 9" x 138 3 /4": 6078033
PN Accy, Sanding Belt (1) 180 Grit 9" x 138 3 /4": 6078034
PN Accy, Sanding Belt (1) 220 Grit 9" x 138 3 /4": 6078035
'); } else { document.write('Close window'); } window.focus(); //-->