|Powermatic 1791304 Model DT45 DoveTailer 1HP, 1Ph, 230V, Manual Clamping|
The POWERMATIC DT45 manual dovetail machine is used to cut dovetails for drawers and various furniture components. The machine is equipped with a router spindle which allows cutting dovetails of adjustable height. The DT45 can machine four types of dovetails with different pitches. Locking and unlocking of pieces takes place manually by an eccentric clamp.
Four centerlines - 1", 1-1/2", 2" and 2-1/2" - create a custom appearance
Manual eccentric clamping will keep boards firm
Eccentric spindle collet for resharpened cutters
Spring loaded carriage makes for smooth, effortless dovetail cutting
Cutter height of 3/16" to 3/4" accommodates different cutting depths and board thicknesses
Extra large soft grip handle provides positive control and comfort
The precision linear carriage bearings are sealed on both ends to eliminate dust buildup
Visual stylus and template aid in guiding the carriage
Material stops provide convenient positioning of the workpiece
Cast iron and steel construction for added stability and durability
1HP motor transfers plenty of power via the drive belt to the spindle
Motor Power: 1 HP
Motor Phase: 1 Ph
Motor Voltage: 115 V
Prewired: 115 V
Minimum Work Piece Size (L x W): 7-7/8" x 2-3/8"
Maximum Work Piece Size (L x W): 31" x 11"
Minimum Dovetail Height: 3"
Maximum Dovetail Height: 3"
Minimum Front Thickness: 9"
Maximum Front Thickness: 1"
Minimum Side Thickness: 9"
Maximum Side Thickness: 1"
Number of Spindles: 1
Spindle Speed: 18500 RPM
Center to Center Dovetail Spacing: 1", 1-1/2", 2" and 2-1/2"
Table Height From Floor: 35"
Dust Port Diameter Outer Dimension: 2-1/2", rear 4"
Dust Collection Minimum CFM Required: 500 cu.ft/min
Height: 61 inches
Width: 33 inches
Length: 33 inches
Net Weight: 320 pound
Dust chute with hose