Jet 320033 J-720R 3HP Radial Drill Press Jet 320033 J-720R 3HP Radial Drill Press
Features:
• The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
• The spindle is made of finest case hardened steel, for extra strength and wear
• The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
• Build to withstand exceptionally heavy drilling and boring loads to insure maximum accuracy
• Arm raising safety device prevents arm from dropping
• Counter balanceed mechanism for spindle return
• 6 Speeds/3 Feed rates make exotic materials easier to drill, bore and tap
• Centralized control center
• Automatic tool ejector
• Independent arm electric clamping system, which locks and unlocks the head and column
• Push botton controls are all reduced to 110VAC
• Electrical circuits are located in the build-in control box at the rear of the arm. This keeps the controls dust-and-humidity-free while making them easilly accessible for maintenance
• Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs

Specifications:
Motor: 3 HP, 230/460V 3Ph, Prewired 230V
Number of Spindle speeds: 6 (88 - 1500)
Spindle Taper: 4 MT
T-Slots Number and Size (in.): 3 & 3/4
Column Diameter (in.): 8-1/4
Drilling Capacity Cast Iron (in.): 2
Drilling Capacity Mild Steel (in.): 1-1/2
Tapping Capacity Cast Iron (in.): 1
Tapping Capacity Mild Steel (in.): 3/4
Boring Capacity Steel (in.): 2-3/7
Boring Capacity Cast Iron (in.): 4
Distance Column to Spindle (max/in.): 29-1/2
Distance Column to Spindle (min/in.): 8-5/8
Travel of Head Horizontal (in.): 20-7/8
Distance Base to Spindle (max/in.): 41-3/4
Distance Base to Spindle (min/in.): 9-5/8
Arm Travel Vertical (in.): 23-13/16
Quill Travel (in.): 8-1/4
Quill Travel w/ Powerfeed engaged (in.): 8-1/4
Quill Down feed Rates (IPR): .002, .004, .006
Elevating Motor: 1 HP
Table Size (in.): 23-5/8 X 17-1/2 X 15
Coolant Pump Motor: 1/8 HP
Machine Height from Floor (in.): 85-7/16
Table Dimensions (in.): 23-5/8 X 17-1/2 X 15
Height: 85 inch
Width: 64 inch
Length: 32 inch
Net Weight: 2697 pound

Standard Equipment:
• Built in work light
• Coolant pump
• Tool kit
• Box table
'); } else { document.write('Close window'); } window.focus(); //-->