Jet 321111 BDB-1340A BENCH LATHE W/ COLLET CLOSER Jet 321111 BDB-1340A BENCH LATHE W/ COLLET CLOSER
Features-
• 13"X40" BELT DRIVE BENCH LATHE
• One of the most popular JET latehs now comes with an enclosed gearbox as a standard feature
• Enclosed gearbox design provides smooth, quiet operation
• Fast, easy speed changes
• Low voltage motor controls
• Helical cut headstock gears reduce noise
• Changes gears alllow metric threading
• Spindle is supported by precision tapered roller bearings
• V-way bed is induction hardened and ground
• Gap bed section provided for large diameter work
• Independent leadscrew and feed rod
• T-slotted compound slide with four-way tool post
• Carriage mounted spindle control lever
• Automatic feeding and threading are fully interlocked
• Feed selectors travel in grooved ways
• Tailstock may be offset for turning tapers and includes an inch/metric graduated quill
• Oil pan included
• Tolerance test certificate included
• 6" 3-jaw direct mount scroll chuck with top reversing jaws
• 8" 4-jaw independent chuck
• 12" faceplate
• Four-way tool post
• Steady and follow rest
• Metric change gear
• Centers with headstock center sleeve
• Threading dial
• Tool box with tools

Specifications:
UPC Code: 662755107993
Height: 29 Inches
Width: 29.75 Inches
Length: 75.5 Inches
Weight: 1200 Pounds
Shipping Weight: 1200 Pounds
Swing over Bed (in.): 13
Swing over Cross Slide (in.): 7-25/32
Swing Through Gap (in.): 183/4
Length of Gap (in.): 8
Distance Between Centers (in.): 40
Spindle Bore (in.): 1-3/8
Spindle Mount: D1-4
Spindle Taper W/ Sleeve: MT-5 (MT-3)
Number of Spindle speeds: 12
Range of Spindle Speeds (RPM): 60-1240
Number of Longitudinal and Cross Feed Rates: 40
Range of Longitudinal Feeds (IPR): .0018-.0374
Range of Cross Feeds (IPR): .0012-.0345
Number of Inch Threads: 40
Range of Inch Threads (TPI): 4-112
Number of Metric Threads: 27
Range of Metric Threads: 0.2-6
Max Tool Size (in.): 5/8 x 5/8
Compound Slide Travel (in.): 2-11/16
Cross Slide Travel (in.): 6-5/16
Carriage Travel (in.): 35
Tailstock Spindle Travel (in.): 3-3/4
Taper in Tailstock Spindle: MT-3
Steady Rest Capacity (in.): 2-5/8
Follow Rest Capacity (in.): 2-3/4
Width of Bed (in.): 7-3/8
Motor: 2 HP, 1Ph, 230V
Prewired: 230V
'); } else { document.write('Close window'); } window.focus(); //-->