Jet 354050 J-2350 28 Jet 354050 J-2350 28" DIRECT DRIVE DRILL PRESS 3HP
Features-
• Direct drive round column drill press with mechanical clutch
• Two speed forward and reverse switch
• Mechanical powerfeed clutch engagement
• Heavy duty quill and spindle
• Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing deflection
• Speed and feed selectors are located on one side of the drill head for convenience and ease of operation
• Oversized base is precision ground with T-slots for added versatility and stability
• Spindle gear box is equipped with steel hardened, ground, shafts and gears
• Spindle gear box is internally lubricated in a continuous oil bath for long term smooth operation.
• Tilting table, 45° left and right
• Powerfeed can be disengaged manually
• Automatic tool ejector
• Manual quill lock
• Coolant system
• Low voltage at switch

Specifications:
UPC Code: 662756093479
Height: 46.5 Inches
Width: 24.5 Inches
Length: 102 Inches
Weight: 1810 Pounds
Shipping Weight: 1840 Pounds
Motor: 3 HP, 230/460V, 3 Ph, Prewired 230V
Number of Spindle speeds: 9
Range of Spindle Speeds (RPM): 82, 120, 180, 240, 354, 528, 678, 1026, 1524
Spindle Taper: MT-4
Quill Diameter (in.): 3.228
Max Distance Spindle to Table ( in.): 30-1/2
T-Slots Number and Size (in.): 3 x 5/8
T-Slot Centers (in.):
Work Table Weight Capacity (lbs.): 400
Drilling Capacity (in.):
Column Diameter (in.):
Base Dimensions (LxWxH/ in.): 102 x 25 x 47
Drilling Capacity Cast Iron (in.): 1-7/8
Drilling Capacity Mild Steel (in.): 1-3/4
Tapping Capacity Cast Iron (in.): 1-3/4
Tapping Capacity Mild Steel (in.): 1-9/16
Quill Travel (in.): 9
Quill Travel w/ Powerfeed engaged (in.): 9
Quill Down feed Rates (IPR): .004, .008, .012, .016
Distance Base to Spindle (in.):
Table Size (in.): 22 x 19
Distance Column to Spindle (in.): 14
Chuck Size (in.):
Drills to Center of Circle (in): 28
Spindle Distance to Base (in.): 49
Swing (in.):
Base Work Table (in.):
Table Travel (in.):
Max Distance - Spindle to Table (in): 30-1/2
Quill Feed:
Spindle Travel (in.): 9
Auto:
Number of Powerfeeds: 4
Motor for A2608-2 (2-Speed):
Motor for A2608-4 (2-Speed):
Vertical Movement of Drill Head:
Vertical Movement of Table (in.):
Type:
Motor A5818/A5838:
Base Slots Number & Size (in.): 2 x 5/8
Swing (in.) (2):
Motor for A3008-4/A3008M-FP4 (2 Speed):
Motor for A4008-4/A4008M-PF4:
Table Dimensions: 22 X 19
Spindle Distance to Table (max./in.): 30-1/2
Spindle Distance to Table (min./in.): 2.67
'); } else { document.write('Close window'); } window.focus(); //-->