Jet 628900 10-20 Plus Bench top Sander Jet 628900 10-20 Plus Bench top Sander
Features-
• Infinitely variable feed rate from 0 to 12 feet per minute for surface, dimension, and finish sanding
• Patented abrasive take-up fasteners for quick abrasive changes
• Self-cooling precision-machined and ballanced 5 x 10 extruded aluminum drum
• TEFC motor prevents dust infiltration
• Continuous-duty, motor allows heavier use for longer periods
• Precision-flattened reinforced steel conveyor bed
• No-give power feed conveyor belt
• Zinc-plated steel tension rollers mount next to the drum
• Drum height and downward pressure are adjustable, eliminating snipe
• 1/16 per turn height adjustment
• Easy-to-use cast iron height adjustment handwheel allows both radical height changes and minute adjustments for extremely precise sanding thickness control
• Minimal assembly required
• Minimum of 400 CFM dust collection recommended
• Safety power switch with overload protection on front of base
• Drum operates at 1,700 RPM
• Drum ball bearing is sealed and permanently lubricated

Standard Equipment-
• One 80 grit abrasive strip
• One 100 grit abrasive conveyor belt
• TRACKERS
• Variable speed conveyor
• TUFTool
• 4 dust port

Product Specifications-
• Max. Width (In.: 20 (Two Passes)
• Min. Length (In.): 2-1/4
• Max. Thickness (In.): 3
• Min. Thickness (In.): 1/32
• Drum Dimensions(dia.xl/in.): 5x10
• Drum Speed (RPM):1,700
• Dust Port Diameter (In.): 4
• Conveyor Motor: 43 in. -Ibs, Torque, Direct Drive, DC
• Conveyor Variable Feed Rate (FPM]: Oto12
• Motor (TEFC): IHPJPh, 115V
• Net Weight (Lbs.): 74
'); } else { document.write('Close window'); } window.focus(); //-->