|Jet 649004K 22-44 Plus Drum Sander With Open Stand 20amp Service 1-3/4HP, 115V|
This sander is a leader in it's class. It can sand up to 44" wide with greater accuracy that any thing else in it's class.
Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload
Patented conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments
Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damage
Sealed and permanently lubricated drum ball bearings for longer life
Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results
Adjustable drum height and downward pressure feature virtually eliminates snipe
Large cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness control
Patented abrasive take-up fasteners make changing abrasives quick and easy
Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute
On/off switch with overload protection is front-mounted for operator's convenience
One feed and one drive motor for superior sanding control
Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time
Our EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload
Style: Open Stand
Maximum Board Width: 44" (2 passes)
Minimum Board Length: 2-1/4"
Maximum Board Thickness: 4"
Minimum Board Thickness: 1/32"
Drum Diameter: 5"
Drum Length: 22"
Drum Speed: 1700 RPM
Conveyor Speed: 0 - 10 SFPM
Conveyor Motor: 43 in.-lbs. torque, direct drive, dc
Dust Port Outside Diameter: 4"
Motor Power: 1-3/4 HP
Motor Voltage: 115 V
Prewired Voltage: 115 V
Motor Current: 20 A
Motor Phase: 1 Ph
Net Weight: 296 pound
In/Out Tables Pictured are NOT included with the purchase of the sander.