Jet 690050 JTM-1050 Variable Speed Vertical Milling Machine 10 Jet 690050 JTM-1050 Variable Speed Vertical Milling Machine 10" x 50" Table, R-8 Taper, 3HP, 3Ph, 230/460V
JTM-1050 Features-
• Meehanite casting
• Hardened and ground table
• Chrome lead screws on X and Y axis
• Turcite B on X and Y axis
• Satin chrome finished dials
• Precision bored and honed milling head
• Large diameter quill is chromed
• High precision Class 7 spindle bearings
• Spindle head is internally cooled
• No Fuse breaker power connection
• Heavy-duty motor drive
• Chrome plated motor shaft with bearing support at end
• One-piece quill pinion and shaft
• Three-stage power downfeed with automatic stop
• Heavy-duty spindle brake
• Locks on all movable surfaces
• Hardened and ground square vertical knee ways and cross ways
• Adjustable gibs throughout
• Internal coolant tank built into base for use with coolant system (Coolant pump not included)
• Tolerance test sheet included

JTM-1050 Standard Equipment-
• One-shot lubrication system
• Way covers
• Draw bar
• Tool box with tools

JTM-1050 Product Specifications-
• Table Size (in.): 10x50
• Spindle Taper: R-8
• Diameter of Quill (in.): 3-3/8
• Number of Spindle Speeds: Variable
• Range of Spindle Speeds (RPM): 70 - 3,800
• Downfeeds of Spindle (per/rev./in.): 0.0015 - 0.003 - 0.006
• Spindle Travel (in.): 5
• Head Movement: 90 degrees R&L45 degrees F&B
• Distance Spindle to Table (max/in.): 19
• Distance Spindle to Column (min./in.): 5-1/2
• Distance Spindle to Column (max./in.): 26
• Collet Capacity (in.): 1/8 - 7/8
• Longitudinal Table Travel (in.) (X-axis): 35
• Cross Travel (in.) (Y-axis): 15-1/4
• T-slot Number & Size (in.): 3 and 5/8
• T-slot Centers (in.): 2-1/2
• Maximum Weight of Workpiece (lbs.): 720
• Travel of Knee (in.) (7-axis): 14-1/4
• Travel of Ram (in.): 20-1/2
• Motor: 3HP, 3Ph, 230/460V Prewired 230V
• Overall Dimensions (in./W x D x H): 95-3/4 x 68-3/4 x 87
• Net Weight (lbs.): 2,900
'); } else { document.write('Close window'); } window.focus(); //-->