Jet 690210 JTM-2 Vertical Milling Machine 9 Jet 690210 JTM-2 Vertical Milling Machine 9" x 42" Table R-8 Taper, 8 Spindle Speeds, 2HP, 1Ph, 115/230V With Acu-Rite 200S DRO And X & Y Powerfeed Installed
JTM-2 Features-
• Our Step Pulley milling machine is the perfect solution for maintenance shops, repair shops, job shops, schools and light production.

JTM-2 Standard Features-
• Runs quieter and smoother than conventional variable speed head
• Low maintenance head has less moving parts
• No Belt slippage allows more at the spindle
• Meehanite casting
• Hardened and ground table
• Chrome lead screw on X and Y axis
• Turcite B on X axis and Y axis
• Large diameter quill is chromed
• High precision Class 7 spindle bearings
• No fuse breaker power connection
• High-dutry motor drive
• Chrome plted motor shaft with bearing support at end
• One-piece quill pinion and shaft
• Three-stage power downfeed with automatic stop
• Heavy-duty spindle brake
• Hardened and ground square vertical knee ways and cross ways
• Adjustable gibs throughout
• Internal coolant ank built into base for use with coolant system (Coolant pump not included)
• Tolerance test sheet included

JTM-2 Standard Equipment-
• One-shot lubrication system
• Way covers
• Draw bar
• Tool box with tools

JTM-2 Product Specufucations-
• Table Size (in.): 10x50
• Spindle Taper: R-8
• Diameter of Quill (in.): 3-3/8
• Number of Spindle Speeds: Variable
• Range of Spindle Speeds (RPM): 10- 3,600
• Downfeeds of Spindle (per/rev./in.): 0.0015 -0.003-0.006
• Spindle Travel (in.): 5
• Head Movement: 90 degrees R & L 45 degrees F
• Distance Spindle to Column (min./in.): 19
• Distance Spindle to Column (max/in.): 5-1/2
• Longitudinal Table Travel (in.) (X-axis):30
• Cross Travel (in.) (Y-axis): 15-1/4
• Collet Capacity (in.): 1/8 - 7/8
• T-slots, Number & Size (in.): 3 and 5/8
• T-slot Centers (in.): 2-1/2
• Maximum Weight of Workpiece (Ibs.): 720
• Travel of Knee (in.) (Z-axis): 14-1/4
• Travel of Ram (in.): 20-1/2
• Motor: 3HP, 3Ph, 230V Only
• Overall Dimensions (in./W x D x H): 95-3/4x70-5/8x88
• Net Weight (Ibs.): 3000

Acu-Rite 200S DRO Features-
• This operator-friendly readout system reduces set-up time and increases throughput with application-specific

features that meet your milling needs
• Easy-to-read, 14-segment vacuum fluorescent display and sealed, 3-D, tactile-feel, and color keypad
• 2 or 3 axis readouts
• Position-Trac, a unique feature that lets you easily, quickly and accurately reestablish workpiece zero after power loss
• 0.00002" to 0.0005" resolution
• Acu-Rite precision glass scales

Acu-Rite 200S DRO Product Specifications-
• Number of Axis: 2 or 3
• Position-Trac: Yes
• Auto Resolution Sensing: Yes
• ABS/INSR: Yes
• Inch/MM Conversion: Yes
• Radius/Diameter: Yes
• Axis Preset: Yes
• Scale Factoring(Mirroring): Yes
• Axis Lock(Hold): Yes
• Zero Reset: Yes
• Near-Zero Warning: Yes
• Reference preset: Yes
• Tool Offset: 10
• Preset: Yes
• Construction: Die-Cast Metal
• Wieght(lbs.): 7.5
• Designed to UL/CSA/CE: Yes
• ISO-9001 Certified: Yes
• Key Legends: Words
• Keypad Technology: Sealed 3-D Tacile Feel
• Display Technology: Vacuum Florescent
• Conversational message prompts: Yes
• Linear Erreo Compensation: 3 Segment
• Scale Resolutions: Yes
• Screen Saver (Sleep): Yes
• Switchable count direction: Yes
• Number Display Resolutions: Multiple
• Warranty Period: 3-Year Hassle-Free

Table Powerfeed Features-
• Specially designed for each model X and Y axis available
• Provides continuously variable feed rate of up to 37 in./min.
• Adjustable stops allow automatic shut off
• Includes rapid traverse button
• Built-in clutch helps prevent damage in overload
• Factory installation available
• Installation of powerfeed will reduce table travel

Table Powerfeed Product Specifications-
• Speed Rate/Variable (IPM): 0-37
• Torque (in./lbs.): 135
• Rapid Traverse (IPM): 37
• Motor: 2-1/2 Amp, 1Ph, 115V
• Net Weight (lbs.): 14
'); } else { document.write('Close window'); } window.focus(); //-->