Jet 691173 JVM-836-1 Mill with NEWALL DP700 DRO Jet 691173 JVM-836-1 Mill with NEWALL DP700 DRO
Features-
• Precision bored and honed milling head
• Large diameter quill is chromed
• High precision spindle bearings
• Over 10? of front to back ram travel
• Locks on all movable surfaces
• Hardened and ground precision table
• Head tilts left or right
• Graduated scale on column
• Precision ground dovetail ways
• One shot lubrication system
• Way covers
• Draw bar
• Tool box and tools

Specifications:
UPC Code: 662755513916
Height: 67 Inches
Width: 56 Inches
Length: 66 Inches
Weight: 1630 Pounds
Shipping Weight: 1630 Pounds
Swing over Bed (in.):
Motor: 1-1/2 HP, 115V, 1 Ph, Prewired 115V
Swing over Cross Slide (in.):
Number of Spindle speeds: 5
Swing Through Gap (in.):
Length of Gap (in.):
Spindle Taper: R-8
Distance Between Centers (in.):
Quill Diameter (in.): 3-3/8
Head Movement (deg.): 90º R & L
Spindle Bore (in.):
Max Distance Spindle to Table ( in.): 13-3/4
Spindle Mount:
Distance Spindle to Column (in.): 15-3/4
Spindle Taper W/ Sleeve:
Table Longitudinal Travel (in.): 22-1/4
Table Cross Travel (in.): 9-1/2
Collet Capacity: 1/8 ? 7/8
Number of Longitudinal and Cross Feed Rates:
Range of Longitudinal Feeds (IPR):
T-Slots Number and Size (in.): 3 and 5/8
Range of Cross Feeds (IPR):
T-Slot Centers (in.): 2-1/2
Number of Inch Threads:
Work Table Weight Capacity (lbs.): 500
Range of Inch Threads (TPI):
Travel of Knee (in.): 14
Number of Metric Threads:
Travel of Ram (in.): 10-1/2
2-Axis CNC:
Range of Metric Threads:
3-Axis CNC:
Max Tool Size (in.):
CNC Package:
Compound Slide Travel (in.):
Cross Slide Travel (in.):
Quill Travel (in.):
Carriage Travel (in.):
Quill Travel w/ Powerfeed engaged (in.):
Quill Down feed Rates (IPR):
Tailstock Spindle Travel (in.):
Range of Spindle Speeds (RPM): 240 - 1550
Taper in Tailstock Spindle:
Steady Rest Capacity (in.):
Table Size (in.): 7-7/8 X 35-3/4
Follow Rest Capacity (in.):
Note:
Distance Spindle to Column (min./in.):
Width of Bed (in.):
'); } else { document.write('Close window'); } window.focus(); //-->