Jet 691180 JVM-836-3 Vertical Milling Machine  8 Jet 691180 JVM-836-3 Vertical Milling Machine 8" x 36" Table, R-8 Taper, 1-1/2HP, 3Ph, 230/260V With Newall C80 DRO and Powerfeed
Features-
• This small mill has all of the features found on our larger mills, but sized for the home shop, repair shops or small maintenance shops.

JVM-836-3 Standard Features-
• Precision bored and honed milling head
• Large diameter quill is chromed
• High precision spindle bearings
• Over 10" of front to back ram travel
• Locks on all movable surfaces
• Hardened and ground precision table
• Head tilts left or right
• Graduated scale on column
• Precision ground dovetail ways

JVM-836-3 Standard Equipment-
• One-shot lubrication system
• Way Covers
• Draw bar
• Tool box and tools

JVM-836-3 Product Specifications-
• Table Size (in.): 7-7/8 x 35-3/4
• Spindle Taper: R-8
• Diameter of Quill (in.): 3-3/8
• Number of Spindle Speeds: 10
• Range of Spindle Speeds (RPM): 240 - 1,550
• Spindle Travel (in.): 5
• Head Movement: 90 degrees R & L
• Distance Spindle to Table (max/in.): 14
• Distance Spindle to Column (min./in.): 5-1/4
• Distance Spindle to Column (max/in.): 15-3/4
• Longitudinal Table Travel (in.) (X-axis): 25-1/4
• Cross Travel (in.) (Y-axis): 9-1/2
• Collet Capacity (in.): 1/8 - 7/8
• T-Slots (Number & Size/ in.): 3 and 5/8
• T-Slot Centers (in.): 2-1/2
• Maximum Weight of Workpiece (lbs.): 500
• Travel of Knee (in.) (7-axis): 14
• Travel of Ram (in.): 10-1/2
• Motor: l-l/2HP 3Ph Prewired 230V only
• Overall Dimensions (in./W x D x H): 55x52x72
• Net Weight (lbs.): 1544

Newall C80 DRO Features-
• This innovative design allows the operator to easily configure the unit for either mill or lathe specific features.
• Includes a feed rate display that allows for longer tool life and increases cutting tool perfornace.
• Built-in interface allows for easy software upgrades via a personal computer.
• Available in 2- and 3-axis configurations
• Upgrades can be downloaded from the internet.
• Newall products are warranted to be free from defeats in meaterials and workmanship for five years. During

the first three years, Newall No-Fault warranty covers system failures caused by accidental damage, customer

abuse and improper installation.

Newall C80 DRO Specifications-
• Absolute/Incremental Operations: Yes
• Inch/Metric Conversion: Yes
• Zero Reset/Data Preset: Yes
• Data Recall: Yes
• Data Hold: Yes
• Radius/Diameter Readings: Yes
• Center Find: Yes
• Home Reference: Yes
• Bolt Hole Circle: Yes
• Grid Hole Array: Yes
• Arc Contouring: Yes
• Zero Approach Warning: Yes
• Linear Error Compensation: Yes
• Segmented Error Compensation: 99 segments
• Memory Back-up: Yes
• Programmable Memory: 99 points
• Edit Capabilities: Yes
• Self Diagnostics: Yes
• Polar Coordinates: Yes
• Line Hole Calculator: Yes
• Tool Offsets: Yes
• Taper Calculations: Yes
• Axis Vectoring/Summing: Yes
• Feed Rate Display; Yes
• Software Upgradeable: Yes
• Keypad: Membrane
• Audible Keystroke Entry: Yes
• Chassis: Die Cast
• Encoder Input: Spherosyn Microsyn

Table Powerfeed Features-
• Specially designed for each model X and Y axis available
• Provides continuously variable feed rate of up to 37 in./min.
• Adjustable stops allow automatic shut off
• Includes rapid traverse button
• Built-in clutch helps prevent damage in overload
• Factory installation available
• Installation of powerfeed will reduce table travel

Table Powerfeed Product Specifications-
• Speed Rate/Variable (IPM): 0-37
• Torque (in./lbs.): 135
• Rapid Traverse (IPM): 37
• Motor: 2-1/2 Amp, IPh, 115V
• Net Weight (Ibs.): 14
'); } else { document.write('Close window'); } window.focus(); //-->