Jet 707100 JMS-10CMS, 10 Jet 707100 JMS-10CMS, 10" Compound Miter Saw
Features-
The new Jet 10" compound miter saw from Jet B3NCH is the right saw at home or on the job. This versatile saw comes standard with our Innovative Green XACTA Laser, a high performance laser system Exclusively from Jet that projects an accurate, high-visibility guide line for precision cuts, even outdoors. Add to that the powerful 15 amp, 4800 RPM motor, comfortable rubber grip handles, and up front controls and you have a saw that is as powerful as it is precise.

• Dual rubber-grip carrying handles allow for convenient portability
• Lightweight die cast aluminum design for easy transport
• Versatile base can mount to a stand or work bench
• Heavy Duty 15 Amp motor for various cutting applications
• Die cast aluminum table for long-lasting durability
• Hold-down clamp tightens securely to the work piece to ensure an accurate cut
• Oversized, ergonomic knobs provide ease of use and maximum control
• Innovative Green XACTA Laser provides high visibility for precision cutting
• Up front controls for safety and ease of use
• Ergonomic, D-shaped, over-molded handle for maximum control during cutting applications
• Quick cam miter lock conveniently adjusts and stops at 9 detents: 0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, and 45 degrees left and right
• Sheet metal extension wings provide added work piece support
• Easy-slide fence extends further to support the work piece

Power & Capacity-
• The Jet 10" Compound Miter Saw is powered by a 120V (only) 15A motor that spins the blade at 4800RPM (no load) for the best all around cutting performance. The 5/8”-diameter arbor accepts 10”-diameter blades like the 40-tooth, carbide tipped one supplied with the Jet 10" Compound Miter Saw. To make changing blade easier we added a pushbutton arbor lock.
• The Jet 10" Compound Miter Saw cross cuts wood up to 2-5/8”-thick and 5-1/2” wide
with the blade at 0-degrees. It will make miter cuts (blade at 0-degrees) in wood up to 2-5/8”-thick and 3-1/2”-wide. Full 45-degree bevels (no miter angle) can be cut in wood up to 1-1/2”-thick and 5-1/2”-wide. A compound miter with the blade at a 45-degree miter and 45-degree bevel still cuts wood up to 1-1/2”-thick and 3-1/2”-wide!
• The Jet 10" Compound Miter Saw also has a total vertical capacity of 4” for wide pieces such as baseboards.

Fence & Table-
• The Jet 10" Compound Miter Saw has a precision 18-1/2”-wide fence with a handy
scale engraved into its face. We added a repositionable upper fence piece on the right
side that helps work with taller pieces such as crown moldings.
• The 18-1/4”-wide table is machined flat to insure accuracy. The useable table surface is up to 4-1/2”-deep (front to back) and is flush with the 11-1/2”-diameter center table
that pivots with the blade for miter cuts. A built-in zero-clearance plate reduces chipping. The table portion also has holes for securing the JET 10" Compound Miter Saw to the work surface for maximum safety and accuracy. We also include a tool-free work holddown clamp that can be positioned to either side of the blade.
• To better handle the big jobs we added a pair of tool-free pull-out supports on each end of the table. These supports extend to a maximum of 12-1/4” to each side and expand the supported surface to a whopping 42-3/4”!

Easy Controls-
• All necessary controls for setting miter and bevel cuts are located on the front of the Jet 10" Compound Miter Saw where they can be reached easily and safely. The controls feature comfortable handles, shapes and easy to use designs. Adjusters are built in to the JET 10" Compound Miter Saw for perfecting the bevel and miter stops should those require adjusting.
• Easy to read scales for bevel and miter cuts make setting
up for critical cuts fast and easy. Detents are provided for
common miter cuts at 0, 15, 22.5, 31.6 and 45-degrees to
the left or right. A pull-to-release pin at the knuckle can
be used to lock the arm in the down position for transport.
• The operating arm features a comfortable grip with an
embedded On/Off trigger switch that reduces the chance
of accidental startups. Also atop the operating arm is a
comfortable handle for carrying the JET 10" Compound
Miter Saw to the job. This handle is properly located so
the saw is balanced to make carrying it less tiring. A full blade guard retracts automatically as the arm is pulled down to make a cut.

Laser Alignment-
• To make aligning your cuts fast and precise, we added our patented green laser guide system to the Jet 10" Compound Miter Saw. The brilliant green laser is easier to see in bright conditions that standard red colored lights. Mounted under the operating arm
behind the blade, the laser light is emitted across the wood being cut without compromising the operator’s vision. The green laser is focused to produce a tight green line that is easy to align with layout marks. The laser emitter is enclosed behind a clear lens to protect it from sawdust.
• Because the laser may not always be needed, we provide its own On/Off switch just behind the operating handle. The laser is powered through the Jet 10" Compound Miter Saw 115V system so failing batteries will not be a frustrating issue. To protect the laser an auto-Off system is built in that shuts it down if the saw is not used in 20 minutes.

Dust Control-
• An effective dust system is built into the Jet 10" Compound Miter Saw. A specially
designed passage scoops up the dust behind the blade and directs it to the port on top of the operating arm. A fabric catch bag with springloaded clamp is included and fits over the dust port.
• Whether you are working in the shop or on the jobsite, the Jet 10" Compound Miter Saw will make your square, bevel, miter and compound cuts more accurate. The large capacity, rugged construction and our 3-year warranty mean you can focus on the job at hand!

Specifications-
Motor Current: 15 A
Blade Speed: 4800 RPM
Blade Diameter: 10"
Miter Stops: 9 stops, -45 degrees to 45 degrees
Bevel Stops: 3 at 0 degrees, 45 degrees and 90 degrees left
Miter Capacity: 0 degrees – 45 degrees left and right
Arbor Size: 5/8”
Cut Capacity @ Cross: 2-5/8” x 5-1/2”
Height: 17.3"
Width: 20.1"
Length: 23.2"
Net Weight: 33.3 lbs.
'); } else { document.write('Close window'); } window.focus(); //-->