|Jet 707120 12" Sliding Dual Bevel Compound Miter Saw|
The powerful Jet B3NCH 12" dual bevel compound miter saw has been designed to make easy work of your toughest jobs. The quick cam miter lock table makes it a breeze to change miter settings, the Innovative Green XACTA Laser, the high performance laser system Exclusively from Jet that projects an accurate, high-visibility guide line for precision cuts, even outdoors, and a powerful 15A ball bearing motor with electric brake makes short work of your toughest jobs. In your shop or on the go, this compound miter saw has the power, precision, and performance you expect from Jet.
Multiple rubber carrying handles allow for convenient portability
Lightweight die cast aluminum design for easy transport
Integrated cord wrap makes transporting easy and ensures workshop safety
Versatile base can mount to a stand or work bench
Heavy Duty 15 Amp motor for various cutting applications
Die cast aluminum table for long-lasting durability
Hold-down clamp ensures an accurate cut by stabilizing the work piece
Oversized, ergonomic knobs provide ease of use and maximum control
Innovative Green XACTA Laser provides high visibility for precision cutting
Up front controls for safety and ease of use
Dual bevel capability allows you to angle and stop at 0 degrees, 33.9 degrees, and 45 degrees left and right
Quick cam miter lock conveniently adjusts and stops at 10 detents: 0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees left and right and 60 degrees right
Ergonomic, D-shaped, over-molded handle for maximum control during cutting applications
Easy-slide fence extends further to support the work piece on both sides
Power, Blade and Capacity-
The Jet 12" Sliding Dual Bevel Compound Miter Saw is powered by a 15A, 120V
(only) motor. The motor is equipped with ball bearings for durability and an automatic
electronic brake for safety. This strong running motor sends its power through a Poly V-belt to generate a consistent 4300RPM (no load) speed at the arbor. This belt drive
substantially reduces vibration and sound for a super smooth cutting action. Using the
belt drive also allows mounting the motor higher to maximize cutting capacity at all
The 5/8-diameter arbor accepts all common 12-diameter blades, including those with a 1-diameter center hole fitted with a 5/8 reducer. The arbor is fully supported in heavy duty ball bearings for a long, smooth operational life. To make changing blades
easier and safer we added a push button arbor lock. We also include a custom shaped blade wrench with the Jet 12" Sliding Dual Bevel Compound Miter Saw
The 12-diameter blade and design of the operating arm give the Jet 12" Sliding Dual
Bevel Compound Miter Saw tremendous cutting capacities throughout the dual bevel
range. With the blade at 0-degrees in both miter and bevel, the Jet 12" Sliding Dual Bevel Compound Miter Saw cuts material up to 4-thick and 12-1/4-wide! At a 45-degree miter, it handles 4-thick by 8-3/4-wide material. At a 45-degree left bevel cutting capacity is 2-1/2-thick by 12-1/4-wide or at a 45-degree right bevel, the capacity is 1-3/4-thick by 12-1/4-wide.
In the compound modes the Jet 12" Sliding Dual Bevel Compound Miter Saw still has remarkable cutting capacities. With a 45-degree miter angle (left or right) and a 45-degree left bevel it handles material up to 2-1/2-thick and 8-3/4-wide. At 45-degree miter (left or right) and a 45-degree right bevel the Jet 12" Sliding Dual Bevel Compound Miter Saw cuts material up to 1-3/4-thick by 8-3/4-wide.Go to a 60-degree right miter and a 45-degree right bevel and cutting capacity is 1-3/4-thick and 6-1/4-wide. The Jet 12" Sliding Dual Bevel Compound Miter Saw also has a standard vertical baseboard capacity (0-degree miter, 0-degree bevel) of 5-1/2!
To get you working right out of the box we include a 12-diameter, 60-tooth carbide
The operating arm has a balance spring at the knuckle that substantially reduces the effort needed to move the blade up and down. A finger-operated knob and flip-out bracket provide fully adjustable depth stop capabilities for grooving and other non-through cut operations. We also added a push pin knuckle lock that when engaged keeps the motor and blade in the down position for transport. The knuckle also has
external adjusters for the right and left bevel stops.
The Jet 12" Sliding Dual Bevel Compound Miter Saw operating arm is equipped with rubber over molded handles for operating and transport. The carry handles are properly located to balance the Jet 12" Sliding Dual Bevel Compound Miter Saw and make transporting it easier. The oval-shaped operating handle has a built-in paddle type
trigger that gives exceptional control. Just ahead of that handle is the Laser On/Off
switch that lets the operator select when to use this system.
The slider mechanism rides on multiple ball bearings for smooth operation and long-term
accuracy. A simple finger knob locks the slider at any point of its movement for transport of specialty operations. The slider mechanism is covered to help keep it clear of debris and functioning smoothly.
Blade Shroud and Dust-
The blade is covered with an automatically retracting guard that rotates back out of the way as the arm is lowered to make a cut. This guard also helps direct the dust away from the operator and towards the dust chute. The upper portion of the blade remains covered by the stationary guard housing.
The specially shaped dust chute at the rear of the blade helps to collect dust and directs it to the port on top of the operating arm. We include a fabric dust bag that is mounted to the port with a tool-free spring clamp for easy emptying.
The Jet 12" Sliding Dual Bevel Compound Miter Saw features controls mounted at the front end of the table arm for ease of use and safety. These controls provide full access to the miter and bevel settings, including the array of detents that make using these common settings fast, easy and accurate. The dual bevel feature includes detents at 0, 33.9, and 45-degrees to the left and right. The quick cam miter lock will secure the arm at any miter angle or one of the 10 detents at 0, 15, 22.5, 31.6, 45-degrees to the left or right and 60 degrees to the right.
The forward controls also include the trigger-style miter table release and the rubber over molded handle that locks the miter setting. Easy to read scales for both miter and bevel angles makes setting the Jet 12" Sliding Dual Bevel Compound Miter Saw accurately
Green XACTA Laser-
The Jet 12" Sliding Dual Bevel Compound Miter Saw is equipped with our patented Green XACTA Laser. This special laser emits a distinct green light that is much easier to see in bright conditions than are the more common red colored versions. The Green XACTA Laser is mounted in a special housing just behind the blade where it is out of the operators direct line of vision but projects its finely focused alignment line of light across the wood in clear view.
The table extension surrounding the blade path has reposition able inserts that can be
adjusted to work much like a zero clearance insert. Also, along the sides of the outboard end of this extension is a pair of swing-out support arms. When rotated out, these arms provide additional support for smaller or oddly shaped work pieces. When not in use, these arms can be swung back into their stored position.
The fence system is specially designed to be fully functional with the blade at all of its
miter and bevel angles. The fence is mounted to the base so that it can be adjusted to be perfectly square to the blade, should that become necessary. The fence has a set of
graduations engraved on its face that make setting up repetitive or specific-length cuts
quick and accurate.
Each side of the fence has a sloped 10-3/8- long upper fence extension that increases vertical support to 4-1/2. The upper extensions are mounted on slides so they can be positioned to best support the work piece and to clear the blade in bevel cutting modes. These fence extensions have markings and detents labeled for 0, 15, 33.9 and 45- degrees (left and right) blade bevel angles. Those markings make it easy to set the
extensions for specific bevel cuts. These fence extensions are also tool free and
secured with a simple cam lock.
The Jet 12" Sliding Dual Bevel Compound Miter Saw also comes with a tool-free work clamp that increases safety and accuracy.
The work clamp can be mounted to the right or left of the blade and can be easily
adjusted to accommodate virtually any size wood.
The Jet 12" Sliding Dual Bevel Compound Miter Saw is designed and built to provide
the power, accuracy and capabilities to make your shop more productive without
sacrificing the budget. Its space saving design and quality construction will make the Jet
12" Sliding Dual Bevel Compound Miter Saw a valuable addition to your shop.
Motor Current: 15 A
Blade Speed: 4200 RPM
Blade Diameter: 12"
Bevel Type: Dual
Miter Stop: 10 stops, -45 degrees to 60 degrees
Bevel Stops: 0 degrees, 33.9 degrees and 45 degrees left & right
Miter Capacity: 45 degrees left 60 degrees right
Arbor Size: 5/8
Cut Capacity @ Cross: 4 x 12-1/4
Net Weight: 72.6 lbs.