Shop Fox M1099 10 Shop Fox M1099 10" x 26" Bench Lathe
Features:
Just like larger lathes, changing the thread selections is quick and easy on our M1099 10" x 26" Bench Lathe. Instead of swapping change gears for each thread selection, merely refer to the thread chart and rotate the alpha and numeric dials on the quick change gearbox to make the thread change. This six speed lathe also has extended length hardened and ground precision bedways, 1" spindle bore, a selection of chucks, face plate and other accessories.

Specifications:
•5" 3-jaw chuck with two sets of jaws
•6-1/2" 4-jaw chuck with reversible jaws
•Steady rest
•Follow rest
•MT#3 dead center
•4-way tool post
•Face plate
•Tool box & tool kit
•Motor: 1 HP, 110V, single-phase
•Swing over bed: 9-5/8"
•Swing over cross slide: 6-1/8"
•Distance between centers: 26"
•Spindle bore: 1"
•Spindle thread: 1-3/4" x 8 TPI
•Spindle nose taper: MT#4
•Number of speeds: 6
•Range of speeds: 150, 300, 560, 720, 1200, 2400 RPM
•Lead screw: 3/4" - 12 TPI
•Compound travel: 3-1/2"
•Cross slide travel: 6-1/2"
•Carriage travel: 22-1/2"
•Maximum tool size: 3/8" x 3/8"
•Tailstock barrel travel: 2-1/2"
•Tailstock barrel taper: MT#3
•Number of longitudinal feeds: 9
•Range of longitudinal feeds: 0.0023 - 0.013
•Number of inch threads: 33
•Range of inch threads: 8 - 72 TPI
•Number of metric threads: 26
•Range of metric threads: 0.25 - 3.5mm
•Overall dimensions: 32"W x 50"L x 16-5/8"H
•Approximate shipping weight: 440 lbs.
'); } else { document.write('Close window'); } window.focus(); //-->