Jet 321360 BDB-1340A 13 Jet 321360 BDB-1340A 13" x 40" Belt Drive Bench Lathe 2 HP 1 Ph 230 V with 321443AK Stand
• Enclosed gearbox design provides smooth, quiet operation
• Fast, easy speed changes
• Low voltage motor controls
• Helical cut headstock gears reduce noise
• Changes gears alllow metric threading
• Spindle is supported by precision tapered roller bearings
• V-way bed is induction hardened and ground
• Gap bed section provided for large diameter work
• Independent leadscrew and feed rod
• T-slotted compound slide with four-way tool post
• Carriage mounted spindle control lever
• Automatic feeding and threading are fully interlocked
• Feed selectors travel in grooved ways
• Tailstock may be offset for turning tapers and includes an inch/metric graduated quill
• Tolerance test certificate included

Swing over Bed (in.): 13
Swing over Cross Slide (in.): 7-25/32
Swing Through Gap (in.): 18-3/4
Length of Gap (in.): 8
Distance Between Centers (in.): 40
Spindle Bore (in.): 1-3/8
Spindle Mount: D1-4
Spindle Taper W/ Sleeve: MT-5 (MT-3)
Number of Spindle speeds: 12
Range of Spindle Speeds (RPM): 60-1,240
Number of Longitudinal and Cross Feed Rates: 40
Range of Longitudinal Feeds (IPR): .0018 - .0374
Range of Cross Feeds (IPR): .0012 -.0345
Number of Inch Threads: 40
Range of Inch Threads (TPI): 4-112
Number of Metric Threads: 27
Range of Metric Threads: 0.2-6
Max Tool Size (in.): 5/8 x 5/8
Compound Slide Travel (in.): 2-11/16
Cross Slide Travel (in.): 6-5/16
Carriage Travel (in.): 35
Tailstock Spindle Travel (in.): 3-3/4
Taper in Tailstock Spindle: MT-3
Steady Rest Capacity (in.): 2-5/8
Follow Rest Capacity (in.): 2-3/4
Width of Bed (in.): 7-3/8
Motor: 2 HP, 1Ph, 230V
Prewired: 230V
Overall Dimensions: 71 x 32 x 45 with stand
Height: 29 inch
Width: 29.75 inch
Length: 75.5 inch
Net Weight: 1175 pounds

Oil pan
6" 3-jaw direct mount scroll chuck with top reversing jaws
8" 4-jaw independent chuck
12" faceplate
Four-way tool post
Steady and follow rest
Metric change gear
Centers with headstock center sleeve
Threading dial
Tool box with tools

Optional Newall C80 DRO Features & Specifications:
The C80 DRO is everything you could ask for in a digital readout and includes a full complement of productivity enhancing features. Available in 2 or 3 axes, the innovative design allows the operator to easily configure the unit for either mill or lathe specific features. In addition, the C80 DRO includes a feed rate display that allows for longer tool life and increased cutting tool performance.

• Absolute/Incremental Operation
• Inch/Metric Conversion
• Zero Approach Warning
• Zero Reset/Data Preset
• Data Recall
• Data Hold
• Radius/Diameter Readings
• Center Find
• Home Reference
• Linear Error Compensation
• Segmented Error Compensation
• Memory Back-up
• Self Diagnostics
• Encoder Failure Alert
• Switchable Resolutions by Axis
• Sleep Mode
• RS232 Interface
• Feed Rate Display
• Bolt Hole Circle
• Arc Contouring
• Programmable Memory
• Polar Coordinates
• Line Hole Calculator
• Tool Offsets
• Taper Calculations
• Axis Vectoring/Summing

Keypad: Membrane
Chassis: Die Cast
Encoder Input:
Spherosyn™ / Microsyn™
Dimensions: 10.4" x 7" x 2" (264 x 178 x 51mm)
Weight: 6.3 lbs. (2.9Kg)
Voltage: 115-230V
CE Approved
'); } else { document.write('Close window'); } window.focus(); //-->