Jet 354034 J-A3008-2 26 Jet 354034 J-A3008-2 26"GEAR HEAD DRILL PRESS 220V, 3PH
• Helical gears for smooth, quiet operation
• Quick release drill ejector
• English/Metric depth gauge
• Machined T-slotted base plate
• Head and table rotate 360 degrees around column
• No-Volt release prevents spindle start when power returns after shut down
• Fully enclosed spindle
• No-volt release prevents spindle start when power returns after shut down

UPC Code: 662756092809
Height: 33 Inches
Width: 23 Inches
Length: 69 Inches
Weight: 565 Pounds
Shipping Weight: 650 Pounds
Motor: 1-1/2 - 2HP, 220V, 3Ph
Number of Spindle speeds: 8
Range of Spindle Speeds (RPM): 90, 190, 320, 530, 640, 1060, 1790, 3610
Spindle Taper: MT-3
Quill Diameter (in.): 2-7/16
Max Distance Spindle to Table ( in.): 35
T-Slots Number and Size (in.): 2 x 9/16
T-Slot Centers (in.):
Work Table Weight Capacity (lbs.): 450
Drilling Capacity (in.):
Column Diameter (in.): 4-1/2
Base Dimensions (LxWxH/ in.): 28 x 24
Drilling Capacity Cast Iron (in.): 1-3/8
Drilling Capacity Mild Steel (in.): 1-1/4
Tapping Capacity Cast Iron (in.): 3/4
Tapping Capacity Mild Steel (in.): 5/8
Quill Travel (in.): 6
Quill Travel w/ Powerfeed engaged (in.):
Quill Down feed Rates (IPR):
Distance Base to Spindle (in.):
Table Size (in.): 15-3/4 x 19-3/4
Distance Column to Spindle (in.):
Chuck Size (in.):
Drills to Center of Circle (in): 26
Spindle Distance to Base (in.): 45-5/8
Swing (in.):
Base Work Table (in.):
Table Travel (in.): 30
Max Distance - Spindle to Table (in): 35
Quill Feed: Manual
Spindle Travel (in.): 6
Number of Powerfeeds:
Motor for A2608-2 (2-Speed):
Motor for A2608-4 (2-Speed):
Vertical Movement of Drill Head: 9
Vertical Movement of Table (in.): 30
Motor A5818/A5838:
Base Slots Number & Size (in.): 2 x 9/16
Swing (in.) (2):
Motor for A3008-4/A3008M-FP4 (2 Speed):
Motor for A4008-4/A4008M-PF4:
Table Dimensions: 15-3/4 x 19-3/4
Spindle Distance to Table (max./in.):
Spindle Distance to Table (min./in.):
'); } else { document.write('Close window'); } window.focus(); //-->