|Jet 708676PK Deluxe XACTA SAW 5HP, 1Ph, 30" RIP|
If you've ever wondered about what a table saw can really do, look no further. Introducing the new Jet 10" DELUXE XACTA SAW. The Quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The DELUXE XACTA SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26" x 30" wings and deeper table gives you even more cast iron to work on. A built-in 12.5" x 18" x 4 " storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage.
EXCLUSIVE 30" Commercial XACTA Fence II with T-square design
Quick release riving knife greatly reduces binding/kickback risk
Push button arbor lock (patent pending) for rapid blade change
Shrouded Blade increases dust collection efficiency
Standard 11" left and right cast iron extension wings provides the largest table surface in its class
Poly-V drive belt system delivers efficient, quiet operation
Rail-mounted magnetic switch is easy to reach and provides overload protection
Enclosed cabinet with built-in sealed storage drawer
Hinged motor cover on cabinet gives quick access to the motor and belts
Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
Built-in 4" port for dust collection
Precision ground high luster cast iron table tops with front edge bevel for hassle-free workpiece positioning
Left tilt, Wide stance heavy-duty trunnion for stability and smooth blade positioning
Independent leaf safety guard protects operator from blade while cutting, even at 45 degree tilt
Powder coated paint for a long-lasting, chip-resistant finish
JET Deluxe XACTA Saw-
There 10 Jet Deluxe XACTA Saw is a high-performance cabinet saw with a full range of high-end, innovative features. While designing the Jet Deluxe XACTA Saw, safety, ease of use, performance and accuracy were primary goals. The JET Deluxe XACTA Saw is available with 3 HP - 230V - 1Ph, 5 HP - 230V - 1 Ph or 5 HP - 230V - 3 Ph, all with 30 or 50 JET XACTA-FENCE II systems in the popular left tilt configuration.
Under the Table-
The Jet Deluxe XACTA Saw features a large, finely ground 29 by 42 cast iron table (with extensions) that provides plenty of work surface for the large jobs, including 10 of clear table in front of the fully raised blade. Under the table is our heavy duty, wide stance cast iron trunnion mechanism which is the heart of the saws remarkable performance, stability and nearly vibration-free operation. Thus, making the Jet Deluxe XACTA Saw one of the most accurate, versatile and smoothest-running cabinet saws available.
The operating mechanism is mounted directly to the all-steel cabinet. This makes aligning the miter slot in the cast iron table with the blade as easy as loosening four hex head cap screws, accessible from the outside under the table corners. Bump the table into alignment and then retighten the screws. There is no easier or more accurate way of making this crucial adjustment. This alignment system is also extremely secure and requires realignment much less frequently than most other designs. To get you started, the table is aligned at the factory to very tight tolerances and those specs along with other critical tolerances are recorded on an inspection sheet that is included with each Jet Deluxe XACTA Saw.
The blade height and bevel changes are made using a pair of heavy, 8 diameter, cast iron handwheels (with spinner handles) that operate precisely machined worm gear drives. Bevel and blade height adjustments are precise, effortless and designed to remain smooth after years of use. Even the locking pins at the center of each handwheel are all steel and precision-machined so that when they are applied there is no creep or change to that setting.
The JET Deluxe XACTA Saw is a left-tilt machine, meaning the blade tilts away from the fence. When cutting bevels this allows the scrap to fall freely onto the table and prevents your work piece from becoming trapped between the fence and the blade insuring safer, burn-free cuts. This puts you in full control of the major piece, insuring the finest possible cut quality.
The standard throat insert plate (left) is designed to work with the full blade guard assembly in place. The Dado insert plate (right) is available as an accessory and accommodates most stacked dado sets at a full 13/16 width.
The throat plate is 15-5/16-long by 4-1/4-wide and provides plenty of access for changing blades and working with our high-tech modular riving knife and blade guard assembly. The standard throat plate insert included with the JET Deluxe XACTA Saw is designed to function with an 1/8 kerf blade at all available angles with the riving knife in place, enhancing safety and performance.
An all-steel cabinet encloses the mechanics of the Jet Deluxe XACTA Saw. It also provides an incredibly stable platform for the saws massive weight. A newly designed hinged curved steel door covers the motor on the side of the Jet Deluxe XACTA Saw cabinet. This door provides good access for cleaning the cabinet interior or making adjustments and can be easily removed for additional access. When closed, the door enhances dust collection.
A sealed drawer reclaims the often-wasted space in the lower portion of the cabinet. This drawer provides handy, clean storage for frequently used tools and accessories. We also included storage hooks on the side of the cabinet for the miter gauge and rip fence when they are not in use.
Power and Control-
The 3HP motor (power rated based on continuous duty cycle) is rigidly mounted directly to the under-table mechanism. Power is delivered to the blade through a pair of precisely machined pulleys and a super-efficient Poly V-belt. The Poly-V Belt design is known for smooth power delivery, resistance to slipping and very low heat generation because of its thin cross section and high surface area contact at the pulleys as compared to common v-belt designs.
The Jet Deluxe XACTA Saw is fully wired internally including the industrial magnetic On/Off switch. This style switch protects the motor from dangerous power fluctuations. It also prevents the Jet Deluxe XACTA Saw from restarting unexpectedly should the power fail and then come back on. The operator must press the On button again to restart the saw after power is restored.
The Jet Deluxe XACTA Saw wiring terminates at a junction box on the rear of the cabinet. That makes it easy to install the appropriate cord/plug combination for your existing shop wiring or to hardwire it to a suitable power source and shut-off switch.
Full Arbor & Easy Blade Changing-
The Jet Deluxe XACTA Saw features a full-length 5/8-diameter arbor designed to accept most stacked dado blade sets at up to 13/16-widths. The arbor is supported on both sides of its cast iron mount by high-quality, sealed ball bearings to insure accurate, smooth, and trouble-free operation for many years to come.
To simplify blade changing we added a push button type arbor lock. Not having to jam the blade with a scrap of wood to loosen or tighten the nut eliminates just one opportunity for damaging the blade, or your hands. To remove or install a blade on the JET Deluxe XACTA Saw simply push the arbor locking button and use the included wrench that is formed with an offset that helps keep your hand away from the cutting edges of the blade.
Modular Guard & Riving Knife-
The Jet Deluxe XACTA Saw comes with a high-tech modular blade guard, anti-kickback pawl and riving knife assembly that helps keep you safe in a wide range of situations other designs are not capable of. The versatility of this system lets you work safer and more efficiently.
The blade guard features independent side panels (leaves) capable of rising individually or together depending on the wood passing below them. When making narrow or trim cuts, one panel can remain flat on the table while the other rises as the wood passes beneath it. That affords an extra margin of safety while enhancing dust collection above the table. Both side panels can be rotated up out of the way for measurements or aligning a cut line. The entire blade guard can be flipped up out of the way for blade changes. When necessary, the blade guard and anti-kickback assemblies can be quickly removed from the riving knife using push-button releases on their mounts. The riving knife itself can be removed and then re-inserted just as quickly by operating the release lever at its mount.
The independent leaves on the blade guard allow one to ride up on the wood and the other to remain flat on the table during narrow cuts to contain more debris and enhance dust collection.
The quick-release mount for the riving knife follows the blade so critical alignments remain constant.
The riving knife assembly is mounted to the same casting as the blade arbor so it remains perfectly aligned through height and bevel changes. That also means the critical spacing between the blade and riving knife remains constant at all times to greatly reduce the chances of kickback for maximum safety. With a typical splitter this spacing is constantly changing depending on
Internal Dust Collection-
The Jet Deluxe XACTA Saw makes use of the fully enclosed cabinet with a specially designed shroud that encloses the lower portion of the blade. A 4-diameter flex hose connects that shroud to a 4 diameter exterior dust port on the rear of the cabinet. When teamed with a capable dust collector such as the JET DC1100 series, this is a highly efficient system that dramatically reduces the amount of dust escaping above and below the table!
Like the riving knife, the dust shroud is mounted to the same cast iron boss as the blade. That means it follows the blade through height and bevel changes to maintain maximum effectiveness. We also offer as accessories the following riving knives - #708682 - thin-kerf riving knife, #708683 - low profile standard kerf riving knife, #708684 - low-profile, thin-kerf riving knife.
Jet XACTA-FENCE II Commercial-
The Jet XACTA-FENCE II, available in 30 and 50 capacity versions enhances accuracy, performance and safety. The Jet XACTA-FENCE II is based on the highly
regarded T-square design but uses high quality materials and manufacturing processes to create an exceptionally accurate, durable and easy to use fence system.
The Jet XACTA-FENCE II is built using heavy steel components that are precision welded to insure accuracy and long-term durability. Even the locking mechanism parts have been given special attention and made using a high-tech powdered metal process. Though considerably more expensive, the powdered metal process creates exceptionally accurate and durable parts.
The T-square head has easy-to-use adjusting screws for squaring the faces to the table surface and the fence face to the miter slots. Both adjustments are important and easy to make, plus they stay adjusted for a long time! An adjustable, magnified cursor lens in the T-square head makes reading the factory applied scale tape easy and accurate.
In place of the common laminate-covered wood materials, the Jet XACTA-FENCE II fence faces are made from a pair of 3/4-thick HDPE (high density polyethylene) slabs. HDPE is very rigid, flat and has exceptional lubricity properties that allows wood to slide along the faces easily and predictably. The faces can be adjusted vertically to ride just above the table or flush with the surface, whichever is safest for the job at hand or your preference. Oversized access holes along the underside of the Jet XACTA-FENCE II make reaching the fasteners that secure the HDPE fence faces easy.
The Jet Deluxe XACTA Saw comes with a full-featured miter gauge. Its 17-3/4-long bar follows the miter slot smoothly and accurately. A disc at the bars leading end engages the T-shaped miter slots and prevents the miter gauge from lifting during a cut.
The miter gauge fence turns to 60-degrees (left or right) and locks easily at any point, including the adjustable presets at 90 and 45-degrees with a twist of the handle.
Dado Insert (#708097)-
An all-metal dado insert is available for the JET Deluxe XACTA Saw. It features leveling screws and an opening sized to accept stacked dado sets at up to 13/16 widths.
Tenoning Jig (#708295)-
Cutting tenons on a table saw is efficient, especially when there are many to make. Our cast iron Tenoning Jig makes cutting tenons accurate, consistent and very safe. The heavy cast iron base and miter slot follower keeps the Tenoning Jig stable and tracking straight for smooth precise cuts.
The Tenoning Jig is fully adjustable and capable of making angle tenons up to 45-degrees to the side or and front-to-back for maximum versatility. An easy to use screw-type clamp keeps the stock firmly secured for safety and accuracy.
Mobile Base (#708118 & #708159 extension kit)-
Being able to move large machines around the shop is important to many woodworkers. Our #708118 Universal Mobile Base and the #708159 Mobile Base Extension Kit make positioning the JET Deluxe XACTA Saw in the best available space in your shop easy. All of the wheels have foot-operated locks to keep the JET Deluxe XACTA Saw stable during use.
Blade Diameter: 10"
Arbor Diameter: 5/8"
Arbor Speed: 4300 RPM
Maximum Depth of Cut: 3"
Maximum Depth of Cut at 45 Degrees: 2-1/8"
Maximum Cross Cut: 21"
Maximum Rip Right of Blade: 30"
Maximum Rip Left of Blade: 13"
Table in Front of Saw Blade at Maximum Depth of Cut: 10"
Maximum Width of Dado: 13/16"
Maximum Diameter of Dado: 8"
Table Type: Cast Iron
Table Height: 34"
Table Size with Standard Extension (L x W): 29" x 42"
Table Size without Extension (L x W): 29" x 20"
Rapid Wing Extension: n.a.
Table Size without Wings (L x W): 29" x 20"
Dust Port Outside Diameter: 4"
Dust Collection Minimum CFM Required: 350 cu.ft.min/min
Dust Collection Adapter Port: n.a.
Leg Stand with Steel Storage: n.a.
Miter Gauge Type: Deluxe
Motor Power: 3 HP
Motor Voltage: 230 V
Prewired Voltage: 230 V
Motor Current: 18 A
Motor Phase: 1 Ph
Family Description: 10" DELUXE XACTA TABLE SAWS
Overall Dimensions: 38" x 36" x 65"
Net Weight: 490 lbs.
5 Year Warranty